Aluminum foil for capacitor parameters

AlloyTe huru â te huruMe'ume'uTe huru â te huruCore inner diameterMaximum outer diameter of aluminum coilThickness toleranceTe vai-ti'amâ-raaBrightness L
Aluminum foil for capacitors 123500.005-0.016Te mau mana'o tauturu no te100-500Te mau mana'o tauturu no te76500≦5Class A (Hi'opo'araa i te pape)≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）

Te mau mana'o tauturu no te(≤)Fe(≤)Si(≤)Al(≥)
0.0050.0030.002599.99
0.0050.0150.01599.97
0.010.020.0299.95
0.010.040.0499.93
0.010.060.0699.90
0.010.100.0899.85
0.0025~0.0050≤0.014≤0.014≥99.97
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）

Te mau mana'o tauturu no teFeSiAl
0.010.160.1699.7
0.010.250.2099.6
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Me'ume'u

(Te mau mana'o tauturu no te)

Te huru â te huruTe puai no te ti'araa p

N /mm2

Te mana'o hape

δ

%

not less than
0.015~0.090M24.52.0
Y98.00.5
0.100~0.200M29.43.0
Y98.00.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. Ua haapii mai te (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Nota: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Faaohiparaa

aluminum foil for capacitor repair

No te aha e ma'iti ai ia tatou?

Henan Huawei Aluminum Co., Ltd. o ' na te raatira o te mau fare hamaniraa e te mau taiete e rave rahi i te fenua Taina. E hi'opoa maite tatou i te huru maitai e e haapao noa tatou i te mau hoani. Te ti'aturi nei matou e, e rave amui outou i te ohipa e e horo'a'tu matou ia outou i te mau materia maitai roa no te hamani i te mau OEM. Mai te peu e e hinaaro outou e fana'o i te moni hoo apî roa ' ' e e te maitai roa ' ' e na roto i te kilo aore ra te kilo, a farerei mai na ia matou.

Reni hamaniraa Aluminum foil

Puohuraa

  • Package: Te hi'oraa o te raau
  • Te mau mana'o tauturu no te tuatapaparaa e te haapiiraa: Length*Width*Hight=1.4m*1.3m*0.8m
  • Ua titauhia i te hoê taime,E nehenehe te faito raau e tauihia mai te mea e titauhia.
  • Te faito teiaha o te raau: 500-700KG Net Weight: 450-650KG
  • Te mau nota: No te mau titauraa taa ê, e apitihia'tu te papa'i faaopa.

 

Te mau tapa'o faahoro parau tu'ati: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor