Wholesale Aluminum foil for capacitor

Фолгаи алюминий барои конденсатор

Хӯлаи металлӣ: 1000, 3000, 8000 силсила ва ғ
Пестлеи гармшуда: О - H112 ва ғайра
Васеъ: 100мм - 1600мм
Ғафсӣ: 0.0053мм - 0.2мм
Диаметри дохилӣ: 76см, 152см ва ғайра
Маводи асосӣ: коғаз, оҳан, алюминий

Паёмҳоро тарк кунед Ирсоли почтаи электронӣ

Aluminum foil for capacitor parameters

Хӯла	Табиат	Ғафсӣ	Васеъ	Core inner diameter	Maximum outer diameter of aluminum coil	Thickness tolerance	Намшавандагӣ	Brightness L
Aluminum foil for capacitors 1235	0	0.005-0.016мм	100-500мм	76	500	≦5	Синф a (Санҷиши оби чӯб)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Фе(≤)	Ва(≤)	Ал(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Шарҳ: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Фе	Ва	Ал
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Шарҳ: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Ғафсӣ (мм)	Табиат	Устувории кашишӣ N /mm2	Дарозиш δ %
Ғафсӣ (мм)	Табиат	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
Дар (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Шарҳ: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Ариза

aluminum foil for electrolytic capacitor

Чаро моро интихоб кунед?

Ширкати Henan Huawei Aluminium Co., Ltd. пешвои бисёр истеҳсолкунандагон ва таъминкунандагони алюминий дар Чин аст. Мо ба таври қатъӣ сифатро назорат мекунем ва ба мизоҷон тамаркуз мекунем. Мо умедворем, ки бо шумо ҳамкории амиқ дошта бошем ва ба шумо маҳсулоти босифати алюминийро бо хидматҳои фармоишии OEM пешниҳод кунем. Агар шумо хоҳед, ки нархҳои навтарин ва беҳтаринро аз рӯи як кг ё як тонна вазни стандартӣ гиред, лутфан бо мо тамос гиред.