Wholesale Aluminum foil for capacitor

Aluminiumfoelie vir kapasitor

Al metaallegering: 1000, 3000, 8000 reeks ens
Aluminium temp: O - H112 ens
Breedte: 100mm - 1600mm
Dikte: 0.0053mm - 0.2mm
Binne deursnee: 76cm, 152cm ens
Kernmateriaal: papier, yster, aluminium

Aluminum foil for capacitor parameters

Allooi	Gemoed	Dikte	Breedte	Core inner diameter	Maximum outer diameter of aluminum coil	Thickness tolerance	Benatbaarheid	Brightness L
Aluminum foil for capacitors 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Class A (Borsel water toets)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	En(≤)	Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Let wel: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	En	Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Let wel: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Dikte (mm)	Gemoed	Trek sterkte N /mm2	Verlenging δ %
Dikte (mm)	Gemoed	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
Die (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Let wel: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Toepassing

aluminum foil for electrolytic capacitor

Hoekom ons kies?

Henan Huawei Aluminium Co., Bpk. is die leier van baie aluminium vervaardigers en verskaffers in China. Ons beheer die kwaliteit streng en fokus op kliënte. Ons hoop om in-diepte samewerking met u te hê en u voorsien van hoë kwaliteit aluminium materiaal produkte persoonlike OEM dienste. As jy die nuutste en beste pryse per kg of per ton standaardgewig wil kry, kontak ons asseblief.

Produksielyn van aluminiumfoelie

Verpakking

Pakket: Hout kis
Standaard Houtkas spesifikasie: Lengte*Breedte*Hoogte=1.4m*1.3m*0.8m
Sodra nodig,houtkasafmeting kan herontwerp word soos benodig.
Per houtkas Bruto gewig skaal: 500-700KG netto gewig: 450-650KG
Opmerking: Vir spesiale verpakkingsvereistes, ooreenstemmende sal dienooreenkomstig bygevoeg word.