Aluminum foil for capacitor parameters

Alloy Kasuko Gibag-on Lapad Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Pagkabasa Brightness L
Aluminum foil alang sa mga capacitor 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Klase a (Pagsulay sa tubig sa brush) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Si Fe(≤) Ug(≤) Si Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Sulat: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Si Fe Ug Si Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Sulat: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Gibag-on

(mm)

 Kasuko Kusog sa Tensile

N /mm2

 Elongation

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. Ang (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Sulat: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Aplikasyon

aluminum foil for capacitor repair

Nganong pilion mi?

Henan Huawei Aluminum Co., Ltd. mao ang nanguna sa daghang mga pabrika ug mga supplier sa aluminyo sa China. Kami hugot nga nagkontrol sa kalidad ug nagtutok sa mga kustomer. Naglaum kami nga adunay lawom nga kooperasyon kanimo ug mahatagan ka sa taas nga kalidad nga mga produkto sa materyal nga aluminyo nga kostumbre nga serbisyo sa OEM. Kung gusto nimo makuha ang labing bag-o ug labing kaayo nga presyo sa matag kg o matag tonelada nga sukaranan nga gibug-aton, palihog kontaka mi.

Aluminum foil produksyon linya

Pagputos

  • Pakete: Kahoy nga kaso
  • Standard nga Wooden case specification: Gitas-on*Lapad*Gtas=1.4m*1.3m*0.8m
  • Sa higayon nga gikinahanglan,Ang dimensyon sa kahoy nga kaso mahimong idisenyo pag-usab kung gikinahanglan.
  • Matag kahoy nga kaso Gross Weight scale: 500-700KG Net nga Timbang: 450-650KG
  • Remark: Alang sa espesyal nga mga kinahanglanon sa pagputos, katugbang idugang sumala niana.

 

May Kalabutan nga mga Tag: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor