Aluminum foil for capacitor parameters

Alyaj Tanperaman Epesè Lajè Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Mouye Brightness L
Papye aliminyòm pou kondansateur 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Klas A (Bwòs dlo tès) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) Epi(≤) Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Biyè: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe Epi Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Biyè: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Epesè

(mm)

 Tanperaman Fòs rupture

N /mm2

 Elongasyon

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. La (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Biyè: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Aplikasyon

aluminum foil for capacitor repair

Poukisa chwazi nou?

Henan Huawei aliminyòm Co., Ltd. se lidè anpil manifakti aliminyòm ak founisè nan Lachin. Nou estrikteman kontwole bon jan kalite a epi konsantre sou kliyan yo. Nou espere gen koperasyon pwofondè avèk ou epi ba ou bon jan kalite materyèl aliminyòm pwodwi koutim sèvis OEM. Si ou vle jwenn dernye ak pi bon pri yo pou chak kg oswa pou chak tòn pwa estanda, tanpri kontakte nou.

Liy pwodiksyon papye aliminyòm

Anbalaj

  • Pake: Ka an bwa
  • Espesifikasyon estanda ka an bwa: Longè * Lajè * Wotè = 1.4m * 1.3m * 0.8m
  • Yon fwa nesesè,dimansyon ka an bwa ta ka reamenaje jan sa nesesè.
  • Pou chak ka an bwa echèl pwa brit: 500-700KG Pwa Net: 450-650KG
  • Remak: Pou kondisyon anbalaj espesyal, korespondan yo dwe ajoute kòmsadwa.

 

Tags ki gen rapò: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor