Aluminum foil for capacitor parameters

Alloy Ka huhū mānoanoa Laulā Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Ka pulu Brightness L
ʻO ka pahu alumini no nā capacitors 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Crika a (ʻO ka hoʻāʻo wai palaki) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) ʻO Fe(≤) A(≤) Ua ʻōlelo ʻo Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Nānā: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu ʻO Fe A Ua ʻōlelo ʻo Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Nānā: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

mānoanoa

(mm)

 Ka huhū Ikaika U'i

N /mm2

 ʻO ka lōʻihi

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. ʻO ka (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Nānā: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Palapala noi

aluminum foil for capacitor repair

No ke aha e koho ai iā mākou?

Henan Huawei Aluminum Co., Ltd. ʻO ia ke alakaʻi o nā mea hana alumini a me nā mea hoʻolako ma Kina. Mālama mākou i ka maikaʻi a nānā i nā mea kūʻai. Manaʻo mākou e launa pū me ʻoe a hāʻawi iā ʻoe i nā huahana alumini kiʻekiʻe kiʻekiʻe nā lawelawe OEM maʻamau. Inā makemake ʻoe e kiʻi i nā kumukūʻai hou loa a maikaʻi loa ma ka kg a i ʻole ka paona maʻamau, e ʻoluʻolu e kelepona mai iā mākou.

Aluminum foil laina hana

Hoʻopili

  • Pūʻolo: pahu lāʻau
  • Kūlana pahu lāʻau maʻamau: Length*Width*Kiʻekiʻe=1.4m*1.3m*0.8m
  • I ka manawa e pono ai,Hiki ke hoʻolālā hou ʻia ka nui pahu lāʻau e like me ka mea e pono ai.
  • No kēlā me kēia pahu lāʻau: 500-700KG Uuna Kaumaha: 450-650KG
  • ʻŌlelo: No nā koi hoʻopili kūikawā, e hoʻohui like ʻia.

 

Nā huapalapala e pili ana: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor