Aluminum foil for capacitor parameters

Kohanga Te riri Mātotoru Whānui Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Makuku Brightness L
Konumohe konumohe mo nga punga 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Akomanga a (Paraihe whakamatautau wai) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) Na(≤) Ko Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Rangi: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe Na Ko Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Rangi: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Mātotoru

(mm)

 Te riri Te Kaha Toka

N /mm2

 Te whakaroa

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. Ko te (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Rangi: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Taupānga

aluminum foil for capacitor repair

He aha tatou i whiriwhiri ai?

Henan Huawei Aluminium Co., Ltd. ko te rangatira o te maha o nga konumohe hanga me nga kaiwhakarato i Haina. Ka tino whakahaerehia e matou te kounga me te aro ki nga kaihoko. Te ti'aturi nei matou kia hohonu te mahi tahi ki a koe me te whakarato ki a koe nga hua rauemi konumohe kounga teitei nga ratonga OEM. Mena kei te pirangi koe ki te tiki i nga utu hou me te utu pai mo ia kg, mo ia tana taumaha paerewa, tēnā whakapā mai.

Raina hanga pepa konumohe

Tarapi

  • Mōkī: Puhi rakau
  • Whakatakotoranga take Rakau Paerewa: Roa*WdW*Tight=1.4m*1.3m*0.8m
  • Kia hiahiatia,Ko te rahi o te keehi rakau ka taea te hoahoa ano ina hiahiatia.
  • Ia kete rakau Tauine Taumaha Kere: 500-700KG Taumaha Net: 450-650KG
  • Korero: Mo nga whakaritenga takai motuhake, ko nga mea e rite ana me taapiri atu.

 

Tags e pā ana: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor