Aluminum foil for capacitor parameters

Aliatge Tremp Gruix Amplada Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Humitabilitat Brightness L
Paper d'alumini per a condensadors 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Classe A (Prova d'aigua de raspall) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) I(≤) Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe I Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Gruix

(mm)

 Tremp Resistència a la tracció

N /mm2

 Elongació

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. El (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Nota: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Aplicació

aluminum foil for capacitor repair

Per què triar-nos?

Henan Huawei Aluminium Co., Ltd. és el líder de molts fabricants i proveïdors d'alumini a la Xina. Controlem estrictament la qualitat i ens centrem en els clients. Esperem tenir una cooperació profunda amb vostè i oferir-vos productes d'alumini d'alta qualitat serveis personalitzats d'OEM. Si voleu obtenir els preus més nous i millors per kg o per tona de pes estàndard, poseu-vos en contacte amb nosaltres.

Línia de producció de paper d'alumini

Embalatge

  • paquet: Estoig de fusta
  • Especificació estàndard de la caixa de fusta: Longitud * Amplada * Alt = 1,4 m * 1,3 m * 0,8 m
  • Un cop necessari,La mida de la caixa de fusta es podria redissenyar segons sigui necessari.
  • Per caixa de fusta Bàscula de pes brut: 500-700KG pes net: 450-650KG
  • Observació: Per a requisits especials d'embalatge, corresponent s'afegiran en conseqüència.

 

Etiquetes relacionades: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor