Aluminum foil for capacitor parameters

Liga Temper Ħxuna Wisa' Core inner diameter Maximum outer diameter of aluminum coil Tolleranza tal-ħxuna Tixrib Brightness L
Fojl tal-aluminju għal capacitors 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Klassi A. (Test tal-ilma tal-pinzell) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) U(≤) Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe U Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Nota: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Ħxuna

(mm)

 Temper Qawwa tat-tensjoni

N /mm2

 Titwil

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. Il- (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Nota: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Applikazzjoni

aluminum foil for capacitor repair

Għaliex tagħżel lilna?

Henan Huawei Aluminum Co., Ltd. huwa l-mexxej ta 'ħafna manifatturi u fornituri tal-aluminju fiċ-Ċina. Aħna nikkontrollaw b'mod strett il-kwalità u niffukaw fuq il-klijenti. Nittamaw li jkollna kooperazzjoni fil-fond miegħek u nipprovdulek prodotti ta 'materjal ta' aluminju ta 'kwalità għolja servizzi OEM tad-dwana. Jekk trid tikseb l-aktar prezzijiet ġodda u aħjar b'piż standard għal kull kg jew għal kull tunnellata, jekk jogħġbok ikkuntattjana.

Linja ta 'produzzjoni tal-fojl tal-aluminju

Ippakkjar

  • Pakkett: Kaxxa tal-injam
  • Speċifikazzjoni standard tal-każ tal-injam: Tul * Wisa ' * Għoli = 1.4m * 1.3m * 0.8m
  • Ladarba meħtieġ,id-dimensjoni tal-kaxxa tal-injam tista 'tiġi ddisinjata mill-ġdid kif meħtieġ.
  • Għal kull każ tal-injam Skala tal-Piż Gross: 500-700KG Piż Nett: 450-650KG
  • Rimarka: Għal rekwiżiti speċjali ta 'ppakkjar, korrispondenti għandhom jiġu miżjuda kif xieraq.

 

Tags relatati: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor