Aluminum foil for capacitor parameters

Álblöndu Skapgerð Þykkt Breidd Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Bleytanleiki Brightness L
Álpappír fyrir þétta 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Flokkur A. (Brush water test) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) Og(≤) Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Athugið: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe Og Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Athugið: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Þykkt

(mm)

 Skapgerð Togstyrkur

N /mm2

 Lenging

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. The (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Athugið: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Umsókn

aluminum foil for capacitor repair

Af hverju að velja okkur?

Henan Huawei Aluminum Co., Ltd. er leiðtogi margra álframleiðenda og birgja í Kína. Við höfum strangt eftirlit með gæðum og einbeitum okkur að viðskiptavinum. Við vonumst til að eiga ítarlegt samstarf við þig og veita þér hágæða álefnisvörur sérsniðna OEM þjónustu. Ef þú vilt fá nýjasta og besta verðið fyrir hvert kg eða tonn af staðlaðri þyngd, vinsamlegast hafðu samband við okkur.

Framleiðslulína úr álpappír

Pökkun

  • Pakki: Trékassi
  • Standard tréhylkislýsing: Lengd*Breidd*Hæð=1,4m*1,3m*0,8m
  • Einu sinni þörf,Hægt væri að endurhanna viðarhylki eftir þörfum.
  • Hvert trékassa Heildarþyngdarvog: 500-700KG Nettóþyngd: 450-650KG
  • Athugasemd: Fyrir sérstakar kröfur um umbúðir, samsvarandi bætist við í samræmi við það.

 

Tengd merki: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, álpappír fyrir þétta, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor