Aluminum foil for capacitor parameters

合金 気性 厚さ 幅 Core inner diameter Maximum outer diameter of aluminum coil 厚さの耐性 濡れ性 Brightness L
コンデンサ用アルミ箔 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 クラスA (ブラシ水テスト) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm~0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm~0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil(%)

銅(≤) 鉄(≤) そして(≤) アル(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
注記: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil(%)

銅 鉄 そして アル
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
注記: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

厚さ

(mm)

気性 抗張力

N /mm2

伸長

δ

%

not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. の (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

注記: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

応用

aluminum foil for capacitor repair

私たちを選ぶ理由?

河南華為アルミニウム有限公司, 株式会社. 中国の多くのアルミニウムメーカーおよびサプライヤーのリーダーです. 私たちは厳格に品質を管理し、顧客を重視します. 私たちはお客様と緊密に協力し、高品質のアルミニウム材料製品のカスタムOEMサービスを提供したいと考えています。. 標準重量 kg あたりまたはトンあたりの最新の最安値を知りたい場合, ご連絡ください.

アルミ箔生産ライン

パッキング

  • パッケージ: 木製ケース
  • 標準木箱仕様: 長さ*幅*高さ=1.4m*1.3m*0.8m
  • 必要に応じて,木製ケースの寸法は必要に応じて再設計できます.
  • 木製ケースごとの総重量スケール: 500-700正味重量KG: 450-650KG
  • 述べる: 特別な梱包要件の場合, 対応するものはそれに応じて追加されます.