Aluminum foil for capacitor parameters

LydinysNuotaikaStorisPlotisCore inner diameterMaximum outer diameter of aluminum coilThickness toleranceDrėkinamumasBrightness L
Aluminum foil for capacitors 123500.005-0.016mm100-500mm76500≦5Class A (Šepetėlio vandens bandymas)≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）

Cu(≤)Fe(≤)Ir(≤)Al(≥)
0.0050.0030.002599.99
0.0050.0150.01599.97
0.010.020.0299.95
0.010.040.0499.93
0.010.060.0699.90
0.010.100.0899.85
0.0025~0.0050≤0.014≤0.014≥99.97
Pastaba: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）

CuFeIrAl
0.010.160.1699.7
0.010.250.2099.6
Pastaba: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Storis

(mm)

NuotaikaTempimo stiprumas

N /mm2

Pailgėjimas

δ

%

not less than
0.015~0.090M24.52.0
Y98.00.5
0.100~0.200M29.43.0
Y98.00.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. The (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Pastaba: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Taikymas

aluminum foil for capacitor repair

Kodėl rinktis mus?

Henan Huawei Aluminium Co., Ltd. yra daugelio aliuminio gamintojų ir tiekėjų lyderis Kinijoje. Mes griežtai kontroliuojame kokybę ir orientuojamės į klientus. Tikimės nuodugniai bendradarbiauti su jumis ir suteikti jums aukštos kokybės aliuminio medžiagų gaminių pagal užsakymą OEM paslaugas. Jei norite gauti naujausias ir geriausias kainas už kg arba už toną standartinio svorio, Prašome susisiekti su mumis.

Aliuminio folijos gamybos linija

Pakavimas

  • Paketas: Medinis dėklas
  • Standartinė medinio korpuso specifikacija: Ilgis*Plotis*Aukštis=1,4m*1,3m*0,8m
  • Kartą prireikė,medinio korpuso matmenys gali būti perdaryti pagal poreikį.
  • Vienai medinei dėžei Bruto svorio skalė: 500-700KG grynasis svoris: 450-650KILOGRAMAS
  • Pastaba: Dėl specialių pakavimo reikalavimų, atitinkamai pridedami atitinkami.

 

Susijusios žymos: 20um etched aluminum foil for supercapacitor, 5 micron aluminium foil capacitor, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor