Aluminum foil for capacitor parameters

합금성질두께너비Core inner diameterMaximum outer diameter of aluminum coil두께 공차습윤성Brightness L
커패시터용 알루미늄 호일 123500.005-0.016mm100-500mm76500≦5Class A (브러시 물 테스트)≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm~0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm~0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil(%)

구리(≤)철(≤)그리고(≤)알()
0.0050.0030.002599.99
0.0050.0150.01599.97
0.010.020.0299.95
0.010.040.0499.93
0.010.060.0699.90
0.010.100.0899.85
0.0025~0.0050≤0.014≤0.014≥99.97
메모: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil(%)

구리그리고
0.010.160.1699.7
0.010.250.2099.6
메모: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

두께

(mm)

성질인장강도

N /mm2

연장

δ

%

not less than
0.015~0.090M24.52.0
Y98.00.5
0.100~0.200M29.43.0
Y98.00.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. 그만큼 (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

메모: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

애플리케이션

aluminum foil for capacitor repair

왜 우리를 선택 했습니까?

허난 화웨이 알루미늄 주식회사, 주식회사. 중국의 많은 알루미늄 제조업체 및 공급업체의 리더입니다.. 우리는 품질을 엄격하게 관리하고 고객에게 중점을 둡니다.. 우리는 귀하와 심층적인 협력을 갖고 고품질의 알루미늄 소재 제품 맞춤형 OEM 서비스를 제공하기를 희망합니다.. kg당 또는 톤당 표준 ​​중량별로 가장 최신의 최적의 가격을 알고 싶다면, 문의하시기 바랍니다.

알루미늄 호일 생산 라인

포장

  • 패키지: 나무 케이스
  • 표준 목재 케이스 사양: 길이*너비*높이=1.4m*1.3m*0.8m
  • 필요하면,필요에 따라 목재 케이스 치수를 재설계할 수 있습니다..
  • 나무로 되는 케이스 당 총중량 가늠자: 500-700KG 순중량: 450-650킬로그램
  • 주목: 특별한 포장 요구사항의 경우, 그에 따라 해당 내용이 추가됩니다..