Wholesale Aluminum foil for capacitor

Aluminum foil para sa capacitor

Al metal haluang metal: 1000, 3000, 8000 serye atbp
Alu temper: O - H112 atbp
Lapad ng katawan: 100mm - 1600mm
Ang kapal: 0.0053mm - 0.2mm
Panloob na diameter: 76cm, 152cm etc
Pangunahing materyal: papel na papel, bakal na bakal, aluminyo

Mag iwan ng mga Mensahe Magpadala ng Email

Aluminum foil for capacitor parameters

haluang metal	Temper	Ang kapal	Lapad ng katawan	Core inner diameter	Maximum outer diameter of aluminum coil	Kapal ng tolerance	Wettability	Brightness L
Aluminum foil para sa capacitors 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Class A (Brush water test)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	Si Si(≤)	Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Tala: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	Si Si	Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Tala: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Ang kapal (mm)	Temper	Lakas ng Paghatak N /mm2	Pagpapahaba δ %
Ang kapal (mm)	Temper	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
Ang (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Tala: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Paglalapat

aluminum foil for electrolytic capacitor

Bakit tayo ang pipiliin?

Henan Huawei Aluminyo Co., Ltd. ay ang lider ng maraming mga tagagawa ng aluminyo at mga supplier sa China. Mahigpit naming kontrolin ang kalidad at tumuon sa mga customer. Umaasa kami na magkaroon ng malalim na pakikipagtulungan sa iyo at magbigay sa iyo ng mataas na kalidad na mga produkto ng materyal ng aluminyo pasadyang mga serbisyo ng OEM. Kung nais mong makakuha ng mga pinakabago at pinakamahusay na presyo sa pamamagitan ng per kg o per ton standard weight, mangyaring makipag ugnay sa amin.

Linya ng produksyon ng aluminyo foil

Pag-iimpake

Pakete: Kaso gawa sa kahoy
Standard Kahoy kaso pagtutukoy: Haba*Lapad*Hight=1.4m*1.3m*0.8m
Minsan na kailangan,kahoy kaso sukat ay maaaring muling idisenyo bilang kinakailangan.
Per kahoy kaso Gross Timbang scale: 500-700KG net timbang: 450-650KG
Magsalita: Para sa mga espesyal na kinakailangan sa packaging, kaukulang ay dapat idagdag nang naaayon.