Aluminum foil for capacitor parameters

Legura Temperament Debljina Širina Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Močljivost Brightness L
Aluminijska folija za kondenzatore 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Klasa a (Test vode četkom) ≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤) Fe(≤) I(≤) Al(≥)
0.005 0.003 0.0025 99.99
0.005 0.015 0.015 99.97
0.01 0.02 0.02 99.95
0.01 0.04 0.04 99.93
0.01 0.06 0.06 99.90
0.01 0.10 0.08 99.85
0.0025~0.0050 ≤0.014 ≤0.014 ≥99.97
Bilješka: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu Fe I Al
0.01 0.16 0.16 99.7
0.01 0.25 0.20 99.6
Bilješka: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Debljina

(mm)

 Temperament Vlačna čvrstoća

N /mm2

 Elongacija

δ

%
not less than
0.015~0.090 M 24.5 2.0
Y 98.0 0.5
0.100~0.200 M 29.4 3.0
Y 98.0 0.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. The (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Bilješka: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Primjena

aluminum foil for capacitor repair

Zašto izabrati nas?

Henan Huawei Aluminium Co., doo. je lider mnogih proizvođača i dobavljača aluminija u Kini. Strogo kontroliramo kvalitetu i fokusiramo se na kupce. Nadamo se da ćemo imati dubinsku suradnju s vama i pružiti vam visokokvalitetne proizvode od aluminijskih materijala prilagođene OEM uslugama. Ako želite dobiti najnovije i najbolje cijene po kg ili toni standardne težine, molimo kontaktirajte nas.

Linija za proizvodnju aluminijske folije

Pakiranje

  • Paket: Drvena kutija
  • Specifikacija standardne drvene kutije: Dužina*Širina*Visina=1,4m*1,3m*0,8m
  • Jednom potrebno,Dimenzije drvenog kućišta mogu se redizajnirati prema potrebi.
  • Bruto vaga po drvenoj kutiji: 500-700KG Neto težina: 450-650KG
  • Napomena: Za posebne zahtjeve pakiranja, odgovarajuće će se dodati u skladu s tim.

 

Povezane oznake: 20um etched aluminum foil for supercapacitor, 5 mikronski kondenzator od aluminijske folije, 5 um aluminium foil capacitor, aluminium foil for capacitors, aluminium foil for electrolytic capacitor, aluminium foil for motor start capacitor, aluminium foil roll for supercapacitor, aluminium foil supercapacitors, aluminum foil capacitor, aluminum foil for capacitor repair, aluminum foil for capacitors, aluminum foil for electrolytic capacitor, aluminum foil power applicationscapacitor, aluminum foil used for capacitor, capacitor aluminium foil, capacitor electronic mat roll aluminum foil, capacitor foil aluminium, etched aluminum foil power capacitor, etching machine for aluminum foil for capacitor, etching of aluminum foil for capacitor