Wholesale Aluminum foil for capacitor

Aluminium foil untuk kapasitor

Paduan logam Al: 1000, 3000, 8000 seri dll
Suhu aluminium: HAI - H112 dll
Lebar: 100mm - 1600mm
Ketebalan: 0.0053mm - 0.2mm
Diameter dalam: 76cm, 152cm dll
Bahan inti: kertas, besi, aluminium

Aluminum foil for capacitor parameters

Paduan	Melunakkan	Ketebalan	Lebar	Core inner diameter	Maximum outer diameter of aluminum coil	Toleransi ketebalan	Keterbasahan	Brightness L
Aluminium foil untuk kapasitor 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Kelas A (Tes air kuas)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	Dan(≤)	Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Catatan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	Dan	Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Catatan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Ketebalan (mm)	Melunakkan	Daya tarik N /mm2	Pemanjangan δ %
Ketebalan (mm)	Melunakkan	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
Itu (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Catatan: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Aplikasi

aluminum foil for electrolytic capacitor

Mengapa memilih kami?

Henan Huawei Aluminium Co., Ltd. adalah pemimpin dari banyak manufaktur dan pemasok aluminium di Cina. Kami secara ketat mengontrol kualitas dan fokus pada pelanggan. Kami berharap dapat memiliki kerja sama yang mendalam dengan Anda dan memberi Anda layanan OEM khusus produk bahan aluminium berkualitas tinggi. Jika Anda ingin mendapatkan harga terbaru dan terbaik dengan standar berat per kg atau per ton, silakan hubungi kami.

Lini produksi aluminium foil

Sedang mengemas

Kemasan: Kotak kayu
Spesifikasi kotak kayu standar: Panjang*Lebar*Tinggi=1,4m*1,3m*0,8m
Sekali diperlukan,dimensi kotak kayu dapat didesain ulang sesuai kebutuhan.
Per kotak kayu Skala Berat Kotor: 500-700KG Berat Bersih: 450-650kg
Komentar: Untuk persyaratan kemasan khusus, yang sesuai harus ditambahkan sesuai.