Aluminum foil for capacitor parameters

آلیاژخلق و خویضخامتعرضCore inner diameterMaximum outer diameter of aluminum coilThickness toleranceترشوندگیBrightness L
Aluminum foil for capacitors 123500.005-0.016میلی متر100-500میلی متر76500≦5Class A (تست آب برس)≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm~0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm~0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil(%)

مس(≤)Fe(≤)و(≤)ال()
0.0050.0030.002599.99
0.0050.0150.01599.97
0.010.020.0299.95
0.010.040.0499.93
0.010.060.0699.90
0.010.100.0899.85
0.0025~0.0050≤0.014≤0.014≥99.97
توجه داشته باشید: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil(%)

مسFeوال
0.010.160.1699.7
0.010.250.2099.6
توجه داشته باشید: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

ضخامت

(میلی متر)

خلق و خویTensile Strength

N /mm2

ازدیاد طول

δ

%

not less than
0.015~0.090M24.52.0
Y98.00.5
0.100~0.200M29.43.0
Y98.00.5

Crystal Structure Properties of Capacitor Aluminum Foil

  1. The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
  2. این (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
  3. The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

توجه داشته باشید: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

کاربرد

aluminum foil for capacitor repair

چرا ما را انتخاب کنید?

شرکت آلومینیوم هنان هواوی, Ltd. رهبر بسیاری از تولید کنندگان و تامین کنندگان آلومینیوم در چین است. ما به شدت کیفیت را کنترل می کنیم و بر مشتریان تمرکز می کنیم. ما امیدواریم که همکاری عمیقی با شما داشته باشیم و خدمات سفارشی OEM محصولات آلومینیومی با کیفیت بالا را به شما ارائه دهیم. اگر می خواهید جدیدترین و بهترین قیمت ها را بر حسب کیلوگرم یا هر تن وزن استاندارد دریافت کنید, لطفا با ما تماس بگیرید.

خط تولید فویل آلومینیوم

بسته بندی

  • بسته: جعبه چوبی
  • مشخصات کیف استاندارد چوبی: طول*عرض*ارتفاع=1.4m*1.3m*0.8m
  • یک بار نیاز است,ابعاد کیس چوبی می تواند در صورت نیاز دوباره طراحی شود.
  • ترازو وزن ناخالص در هر کیس چوبی: 500-700کیلوگرم وزن خالص: 450-650کیلوگرم
  • تذکر دهید: برای شرایط بسته بندی خاص, مربوطه باید بر این اساس اضافه شود.