Wholesale Aluminum foil for capacitor

Aluminiumfolie voor condensator

Al-metaallegering: 1000, 3000, 8000 serie enz
Aluminium temperatuur: O - H112 enz
Breedte: 100mm - 1600mm
Dikte: 0.0053mm - 0.2mm
Binnenste diameter: 76cm, 152cm enz
Kernmateriaal: papier, ijzer, aluminium

Aluminum foil for capacitor parameters

Legering	Woedeaanval	Dikte	Breedte	Core inner diameter	Maximum outer diameter of aluminum coil	Thickness tolerance	Bevochtigbaarheid	Brightness L
Aluminiumfolie voor condensatoren 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Class A (Borstelwatertest)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	En(≤)	Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Opmerking: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	En	Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Opmerking: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Dikte (mm)	Woedeaanval	Treksterkte N /mm2	Verlenging δ %
Dikte (mm)	Woedeaanval	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
De (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Opmerking: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Sollicitatie

aluminum foil for electrolytic capacitor

Waarom voor ons kiezen?

Henan Huawei Aluminium Co., Ltd. is de leider van veel aluminiumfabrikanten en leveranciers in China. Wij controleren strikt de kwaliteit en richten ons op klanten. We hopen een diepgaande samenwerking met u te hebben en u hoogwaardige OEM-diensten op maat van aluminiumproducten te bieden. Als u de nieuwste en beste prijzen per kg of per ton standaardgewicht wilt krijgen, Contacteer ons alsjeblieft.

Productielijn voor aluminiumfolie

Inpakken

Pakket: Houten doos
Standaard houten kistspecificatie: Lengte*Breedte*Hoogte=1,4m*1,3m*0,8m
Eenmaal nodig,De houten kistafmetingen kunnen indien nodig opnieuw worden ontworpen.
Per houten kist Brutoweegschaal: 500-700KG Netto Gewicht: 450-650KG
Opmerking: Voor speciale verpakkingseisen, dienovereenkomstig worden dienovereenkomstig toegevoegd.