Wholesale Aluminum foil for capacitor

Kerajang aluminium untuk kapasitor

Aloi logam Al: 1000, 3000, 8000 siri dll
Suhu aluminium: O - H112 dsb
Lebar: 100mm - 1600mm
Ketebalan: 0.0053mm - 0.2mm
Diameter dalaman: 76cm, 152cm dll
Bahan teras: kertas, besi, aluminium

Aluminum foil for capacitor parameters

Aloi	perangai	Ketebalan	Lebar	Core inner diameter	Maximum outer diameter of aluminum coil	Toleransi ketebalan	Kebolehbasahan	Brightness L
Kerajang aluminium untuk kapasitor 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Kelas A (Ujian air berus)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	Dan(≤)	Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Catatan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	Dan	Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Catatan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

Ketebalan (mm)	perangai	Kekuatan Tegangan N /mm2	Pemanjangan δ %
Ketebalan (mm)	perangai	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
The (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Catatan: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Permohonan

aluminum foil for electrolytic capacitor

Kenapa pilih kami?

Henan Huawei Aluminium Co., Ltd. adalah peneraju banyak pengeluar dan pembekal aluminium di China. Kami mengawal kualiti dengan ketat dan memberi tumpuan kepada pelanggan. Kami berharap dapat mempunyai kerjasama yang mendalam dengan anda dan menyediakan perkhidmatan OEM tersuai produk bahan aluminium berkualiti tinggi kepada anda. Jika anda ingin mendapatkan harga terbaru dan terbaik mengikut berat standard per kg atau setiap tan, sila hubungi kami.

Barisan pengeluaran kerajang aluminium

Pembungkusan

Pakej: Kes kayu
Spesifikasi kes kayu standard: Panjang*Lebar*Tinggi=1.4m*1.3m*0.8m
Setelah diperlukan,dimensi kes kayu boleh direka bentuk semula mengikut keperluan.
Setiap kes kayu Skala Berat Kasar: 500-700KG Berat Bersih: 450-650KG
Teguran: Untuk keperluan pembungkusan khas, yang sepadan hendaklah ditambah dengan sewajarnya.