Parameters Alloy: 1100, 1145, 8011 etc Temper: O ( HO ), H22 etc Thickness: 15 micron ( 0.015mm ), 40 micron ( 0.04mm ) etc Width: 200mm, 1400mm etc About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high qualit ...
Parameters Alloy: 1100, 1145, 8011 etc Temper: O ( HO ), H22 etc Thickness: 15 micron ( 0.015mm ), 40 micron ( 0.04mm ) etc Width: 200mm, 1400mm etc About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high qualit ...
1200 aluminum foil details Alloy 1200 aluminum foil Temper F, O,H12,H16,H18,H22,H24,H26 Thickness 0.3-15mm Width*Length (10-1600mm)*C 1200 alloy aluminum foil parameters Chemical Composition of Alloy 1200 aluminium foil Si+Fe Cu Mn Zn Ti Mg Cr Other Al ≤1.0 ≤0.05 ≤0.05 ≤0.1 ≤0.05 - - 0.05(each) 0.15(total) 99.00 Mechanical propertiesof ...
Mechnical Properties Dinomination Gauge/Thickness (mm) Alloy Temper Tensile Strenght (MPa) Elogation (%) Food Container Foil 0.041 – 0.089 1235-O 45 – 100 >4 0.09 – 0.139 50 – 100 >6 0.14 – 0.20 50 – 100 >10 Application Food container etc
It uses two layers of medicinal strip packaging film (SP) to sandwich the medicines. The distance between the unit medicines is a certain interval. The inside of the two SP films near the medicines are heat-sealed on the strip vacuum packaging equipment. A form of unit packaging formed by pressing tooth marks in between. Strip packaging is continuous work on strip vacuum packaging equipment, which is especially s ...
In the production process of aluminum foil, there are multiple processes such as rolling, finishing, annealing, packaging, etc. The interlocking production process, any problem in any link may cause aluminum foil quality problems. The quality defects of the purchased aluminum foil products will not only affect the appearance, but also directly affect the quality of the products produced, and even more directly ca ...
Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...
In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...
It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...
1. The raw materials are non-toxic and the quality is safe Aluminum foil is made of primary aluminum alloy after rolling through multiple processes, and it has no harmful substances such as heavy metals. In the aluminum foil production process, a high-temperature annealing and disinfection process is used. Therefore, the aluminum foil can be safely in contact with food and will not contain or help the growth o ...
Nowadays, many female companions attach great importance to beauty and skin care. Women who are busy with their lives and work often use facial masks for skin care, which can provide sufficient nutrients for the facial skin and make the skin healthier and more energetic. With the increasing demand for facial masks, many manufacturers now make and produce facial masks. In order to improve the storage time of facia ...