aluminum foil roll jumbo

Custom alloy aluminum foil jumbo roll

Generally, aluminum foil is made of 1000 series, 3000 series, 8000 series alloys. The most commonly used alloys are 8011. Different alloys have different uses, we can customize various alloy models according to the requirements of customers. Alloy 1 series: 1235 etc 3 series: 3003 etc 8 series: 8011, 8079 etc According to the temper, aluminum foil can be divided into hard foil, semi-rigid foil ...

thin aluminum foil

Thin aluminum foil

Production process of ultra-thin aluminum foil A short-flow production process of ultra-thin aluminum foil, which is characterized in that it is carried out according to the following process steps: The first step, smelting: Use a large-capacity regenerative smelting furnace to convert the primary aluminum into molten aluminum, and enter the casting and rolling mill through the launder. During the flow of t ...

aluminum foil roll jumbo

Custom alloy aluminum foil jumbo roll

Generally, aluminum foil is made of 1000 series, 3000 series, 8000 series alloys. The most commonly used alloys are 8011. Different alloys have different uses, we can customize various alloy models according to the requirements of customers. Alloy 1 series: 1235 etc 3 series: 3003 etc 8 series: 8011, 8079 etc According to the temper, aluminum foil can be divided into hard foil, semi-rigid foil ...

food aluminum foil roll

Aluminum foil for food

Parameters Alloy: 1235, 8011 etc Application: food grade packaging bag, food wrapping etc Food grade aluminum foil is mainly used for food and quasi-food packaging, the thickness is 0.015, 0.012, 0.009, 0.007 microns, and the aluminum alloys are 1145, 1235, 1100, 3003, 8011, 8079 and so on. The performance requirements for food grade aluminium foil are strict because it is connected to the food direc ...

What is the role of aluminum foil stack rolling (double rolling)?

Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...

Selection principle of aluminum foil pass processing rate

The selection principle of pass processing rate is as follows: (1) Under the premise that the equipment capacity allows the rolling oil to have good lubrication and cooling performance, and can obtain good surface quality and shape quality, the plasticity of the rolled metal should be fully utilized, and the large pass processing rate should be used as much as possible to improve the rolling mill Production ef ...

Are aluminum foil lunch boxes poisonous?

Aluminum foil lunch box is a new type of non-toxic and environmentally friendly tableware. 1. The main ingredient in the aluminum foil lunch box is aluminum, so it will react with acid like aluminum cans, and the salt produced by aluminum and organic acids will react with gastric acid to produce aluminum chloride, so we need to use it. Note that, generally speaking, it is often used for steaming rice. There is ...

Semi-rigid container foil and surface oiling treatment

Pre-coated aluminum foil used for punching various containers, commonly used alloy 8011, 3003, 3004, 1145, etc., thickness is 0.02-0.08mm. Oiling thickness is 150-400mg/m². The use of aluminum foil as a semi-rigid container to hold food has been widely adopted at home and abroad. With the continuous development of the national economy and the continuous improvement of people’s living standards, people’s health ...

The application potential of aluminum foil in lithium batteries is huge

The development of new energy vehicles is an important part of the low-carbon economy, and plays an important role in alleviating the contradiction between energy supply and demand, improving the environment, and promoting sustainable economic development. New energy vehicles are one of the industries that best reflect a country's technological development level, independent innovation capabilities and internatio ...

What are the advantages of aluminum foil lunch boxes and containers?

1. The raw materials are non-toxic and the quality is safe Aluminum foil is made of primary aluminum alloy after rolling through multiple processes, and it has no harmful substances such as heavy metals. In the aluminum foil production process, a high-temperature annealing and disinfection process is used. Therefore, the aluminum foil can be safely in contact with food and will not contain or help the growth o ...