aluminum foil for ducts

Aluminum foil for duct

About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high quality aluminum material products custom OEM services. If you want to get the newest and best prices by per kg or per ton standard weight, please contact us. Aluminum foi ...

1235 aluminum foil

1235 alloy aluminum foil

Mechnical Properties Dinomination Gauge/Thickness (mm) Alloy Temper Tensile Strenght (MPa) Elogation (%) Food Container Foil 0.041 – 0.089 1235-O 45 – 100 >4 0.09 – 0.139 50 – 100 >6 0.14 – 0.20 50 – 100 >10 Application Food container etc

1200 aluminum foil

1200 alloy aluminum foil

1200 aluminum foil details Alloy 1200 aluminum foil Temper F, O,H12,H16,H18,H22,H24,H26 Thickness 0.3-15mm Width*Length (10-1600mm)*C 1200 alloy aluminum foil parameters Chemical Composition of Alloy 1200 aluminium foil Si+Fe Cu Mn Zn Ti Mg Cr Other Al ≤1.0 ≤0.05 ≤0.05 ≤0.1 ≤0.05 - - 0.05(each) 0.15(total) 99.00 Mechanical propertiesof ...

single zero large roll aluminum foil

Single zero aluminum foil

Single zero aluminum foil refers to aluminum foil with a thickness between 0.01mm ( 10 micron ) and 0.1mm ( 100 micron ). 0.01mm ( 10 micron ), 0.011mm ( 11 micron ), 0.012mm ( 12 micron ), 0.13mm ( 13 micron ), 0.14mm ( 14 micron ), 0.15mm ( 15 micron ), 0.16mm ( 16 micron ), 0.17mm ( 17 micron ), 0.18mm ( 18 micron ), 0.19mm ( 19 micron ) 0.02mm ( 20 micron ), 0.021mm ( 21 micron ), 0.022mm ( 22 mic ...

thin aluminum foil

Thin aluminum foil

Ultra-thin aluminum foil short process production process which is characterized by: Step 1: smelting: the use of a large-capacity regenerative melting furnace to convert the raw aluminum into liquid aluminum, after cleaning into the foundry. In the process of liquid aluminum flow, Al-Ti-B is added online to form a continuous and uniform thinning effect. The graphite rotor can be degassed and slag removed onlin ...

Can we put the aluminum foil in the air fryer?

As the name suggests, an air fryer is a machine that uses air to "fry" food. It by using the principle of high-speed air circulation, mainly through the heating tube to heat the air, and then the fan will air into high-speed circulation heat flow, when the food is heating, hot air convection can make food fast dehydration, the oil of baking food itself, in the end, become golden crispy food surface, appear simila ...

What are the causes of foil coiling defects?

Coiling defects mainly refer to loose, layer channeling, tower shape, warping and so on. Aluminum foil roll during the winding process. Because the tension of aluminum foil is limited, enough tension is the condition to form a certain tension gradient. Therefore, the winding quality ultimately depends on good shape, reasonable process parameters and suitable precision sleeve. It is ideal to obtain tight coils ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...

Why does the transformer foil winding machine limit the thickness of aluminum foil? How to increase the thickness of aluminum foil?

Foil winding, aluminum foil to be tensioned, in order to maintain a certain tension, smooth, flat winding coil, the thicker the aluminum foil requires greater tension, the maximum tension of the coil winding machine is limited, exceeding the maximum tension of the machine is dangerous, the tension is too small winding coil loose, can not ensure the size requirements. Therefore, here is not to say that you want to ...

The cause of pinhole in aluminum foil production process?

Aluminum foil pinhole has two main factors, one is the material, the other is the processing method. 1. Improper material and chemical composition will lead to a direct impact on the pinhole content of fake aluminum foil Fe and Si. Fe>2.5, Al and Fe intermetallic compounds tend to form coarse. Aluminum foil is prone to pinhole when calendering, Fe and Si will interact to form a firm compound. The number of ...

8011 aluminum foil roll

The order of 8011 aluminum foil roll #03251427 ( export to India )

Product name: 8011 aluminum foil roll ID: 76MM, MAX ROLL WEIGHT: 55kg ITEM SPECIFICATION (MM) ALLOY / TEMPER 1 0.015*120 8011 O 2 0.012*120 8011 O 3 0.015*130 8011 O 4 0.015*150 8011 O ID: 76MM, MAX ROLL WEIGHT: 100 kg 5 0.015*200 8011 O