It uses two layers of medicinal strip packaging film (SP) to sandwich the medicines. The distance between the unit medicines is a certain interval. The inside of the two SP films near the medicines are heat-sealed on the strip vacuum packaging equipment. A form of unit packaging formed by pressing tooth marks in between. Strip packaging is continuous work on strip vacuum packaging equipment, which is especially s ...
Aluminium foil general parameters for transformers Alloy 1050/1060/1070/1350 Aluminium foil for transformer Temper 0 Thickness 0.2--4mm Width 20-1650mm Thickness deviation 76 The width of the deviation 500 Thickness tolerance ≦5 Brightness L ≦60 wettability Class A (Brush test) Tensile strength(Mpa) At customer's request Elongation δ% （Scaling i ...
8011 alloy aluminum foil is added Al-Fe-Si elements, more than 1% of the total alloying elements in the corresponding performance of its alloy has a higher advantage, mainly for food packaging, pharmaceutical packaging. Machinable range of thickness: 0.02mm-0.07mm, width 300mm-1100mm, can be customized according to customer needs. Parameters Type 8011 aluminium foil State F, O ( HO ), H14, H ...
As one of the 8 series aluminum foils, 8021 aluminum foil is a series of alloy products commonly used in food packaging aluminum foil, and its good alloy properties are inseparable. The surface of 8021 aluminum foil is extremely clean and hygienic. No bacteria or microorganisms can grow on the surface. It is a non-toxic packaging material that can be in direct contact with food without any hazard to human hea ...
Application Aluminum foil for capacitor Aluminum foil for battery Aluminum foil for cable Electrically conductive aluminum foil tape
1145 aluminum foil general parameters Alloy 1145 aluminum foil Temper O, H18, H19 Product Style coil, roll Thickness 0.01-0.2mm,0.0005 to 0.064 inches Width 100-1600mm,0.375 to 60 inches Length（mm） customization Thickness tolerance +/- 2% Performance One is high plasticity and corrosion resistance, and the other is electrical and thermal conductivity, which can ...
Since aluminum foil has shiny and matte sides, most of the resources found on search engines say this: When cooking food wrapped or covered with aluminum foil, the shiny side should face down, facing the food, and the dumb side Glossy side up. This is because the glossy surface is more reflective, so it reflects more radiant heat than matte, making the food easier to cook. Is it really? Let's analyze the heat ...
Degreasing pollution is mainly manifested on the surface of the aluminum foil in 0 state. After the aluminum foil is annealed, it is tested by the water brushing method, and it does not reach the level specified in the water brushing test. The aluminum foil that requires the water-washing test is mainly used for printing, composite with other materials, etc. Therefore, the surface of the aluminum foil must be ...
Only China, the United States, Japan and Germany can produce double zero foils with a thickness of 0.0046mm in the world. From a technical point of view, it is not difficult to produce such thin foils, but it is not easy to efficiently produce high-quality double-zero foils on a large scale. At present, many enterprises in my country can realize the commercial production of double zero foil, mainly including: ...
Six Factors Restricting the Heat Sealing Strength of Pharmaceutical Aluminum Foil Packaging Products
For aluminum foil pharmaceutical packaging, the quality of the product is largely reflected in the heat seal strength of the product. Therefore, several factors that affect the heat-sealing strength of aluminum foil bags for medicines have become the key to improving the quality of product packaging. 1. Raw and auxiliary materials The original aluminum foil is the carrier of the adhesive layer, and its qual ...
ITEM SIZE (MM) ALLOY / TEMPER WEIGHT (KGS) ALUMINIUM FOIL, ID: 76MM, ROLL LENGTH: 12000 - 13000 meters 1 0.007*1270 1235 O 18000.00
1. The raw materials are non-toxic and the quality is safe Aluminum foil is made of primary aluminum alloy after rolling through multiple processes, and it has no harmful substances such as heavy metals. In the aluminum foil production process, a high-temperature annealing and disinfection process is used. Therefore, the aluminum foil can be safely in contact with food and will not contain or help the growth o ...