aluminum strip foil for pills foil packaging

Easy tear aluminum strip foil for medicine

It uses two layers of medicinal strip packaging film (SP) to sandwich the medicines. The distance between the unit medicines is a certain interval. The inside of the two SP films near the medicines are heat-sealed on the strip vacuum packaging equipment. A form of unit packaging formed by pressing tooth marks in between. Strip packaging is continuous work on strip vacuum packaging equipment, which is especially s ...

Aluminum foil for honeycomb

Honeycomb aluminum foil is generally 3003 alloy, h18 state, and the thickness is between 0.03-0.08mm, mostly between 0.04-0.06mm. There is also a small amount of 5052 alloy honeycomb aluminum foil, but due to the high cost and low consumption, the product has strict requirements on the plate shape and thickness, and lower requirements on the plate surface. Typical alloy 3003 5052 Temper O,H14, H16, ...

1200 aluminum foil

1200 alloy aluminum foil

Application Food container, cigarette foil etc

hydrophilic aluminum foil

Hydrophilic aluminum foil

The surface of hydrophilic aluminum foil has strong hydrophilicity. The hydrophilicity is determined by the angle formed by the water sticking to the surface of the aluminum foil. The smaller the angle a, the better the hydrophilic performance, and vice versa, the worse the hydrophilic performance. Generally speaking, the angle a is less than 35. It belongs to hydrophilic properties. Hydrophilic aluminum foil ...

Fire prevention measures during aluminum foil rolling

Fire or explosion in aluminum foil rolling must meet three conditions: combustible materials, such as rolling oil, cotton yarn, hose, etc.; combustible materials, that is, oxygen in the air; fire source and high temperature, such as friction, electric sparks, static electricity, open flames, etc. . Without one of these conditions, it will not burn and explode. The oil vapor and oxygen in the air generated duri ...

Aluminum foil rolling process and characteristics

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

How to distinguish between good and bad aluminum foil? Comprehensively sort out the quality defects of aluminum foil

In the production process of aluminum foil, there are multiple processes such as rolling, finishing, annealing, packaging, etc. The interlocking production process, any problem in any link may cause aluminum foil quality problems. The quality defects of the purchased aluminum foil products will not only affect the appearance, but also directly affect the quality of the products produced, and even more directly ca ...

Analysis on the Causes of Drums in High-speed Aluminum Foil Rolling

It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...

Application and precautions of aluminum foil lunch box

The aluminum foil disposable lunch box has excellent oil and water resistance and is easy to recycle after being discarded. This kind of packaging can quickly reheat the food and keep the fresh taste of the food. 1. Performance of aluminum foil tableware and containers: All kinds of food lunch boxes produced by aluminum foil, aviation lunch boxes currently generally adopt the latest and most scientific alum ...

Development of domestic double zero foil project

Only China, the United States, Japan and Germany can produce double zero foils with a thickness of 0.0046mm in the world. From a technical point of view, it is not difficult to produce such thin foils, but it is not easy to efficiently produce high-quality double-zero foils on a large scale. At present, many enterprises in my country can realize the commercial production of double zero foil, mainly including: ...