cable aluminum foil

Aluminum foil for cable

The outer surface of the cable needs to be wrapped with a layer of aluminum foil for protection and shielding. This kind of aluminum foil is usually made of 1145 grade industrial pure aluminum. After continuous casting and rolling, cold rolling, slitting and complete annealing, it is divided into small coils according to the length required by the user and supplied to the cable foil compounding plant. The ...

3003 aluminum foil roll

3003 alloy aluminum foil

About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high quality aluminum material products custom OEM services. If you want to get the newest and best prices by per kg or per ton standard weight, please contact us. Aluminum foil pr ...

aluminum foil for pharmaceutical

Aluminum foil for pharmaceutical

Alloy: 1145, 8011 etc Thickness: 0.0065mm - 0.05mm Width: 250mm - 1050mm Product type PTP aluminum blister foil Cold form alu alu foil Easy tear aluminum strip foil About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide yo ...

insulation aluminum foil

Aluminum foil for insulation

Parameters Alloy: 1100, 1145, 8011 etc Temper: O ( HO ), H22 etc Thickness: 15 micron ( 0.015mm ), 40 micron ( 0.04mm ) etc Width: 200mm, 1400mm etc About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high qualit ...

width of aluminum foil

Custom width aluminum foil jumbo roll

The width of aluminum foil is usually 10mm ~ 1900mm. Different widths have different uses. We can customize different width according to your requirements. Such as 15mm (1.5 cm)20mm, 45mm, 50mm (5 cm), 60mm (6 cm), 101mm, 110mm, 150mm (15 cm), 203mm, 24 cm, 245mm, 250mm (25 cm), 290mm ( 29 cm ), 300mm (30 cm), 400mm (40 cm), 450mm (45 cm), 18 inch, 500mm (50 cm), 600mm (60 cm), 1000mm (100 cm), 1200mm etc

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...

Analysis on the Causes of Drums in High-speed Aluminum Foil Rolling

It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...

Ways to prevent aluminum foil from degreasing

Degreasing pollution is mainly manifested on the surface of the aluminum foil in 0 state. After the aluminum foil is annealed, it is tested by the water brushing method, and it does not reach the level specified in the water brushing test. The aluminum foil that requires the water-washing test is mainly used for printing, composite with other materials, etc. Therefore, the surface of the aluminum foil must be ...

Several Factors Affecting the Heat Sealing Strength of Aluminum Foil Medicine Packaging

The main factors affecting the heat sealing strength of aluminum foil medicine packaging are as follows: 1. Raw and auxiliary materials The original aluminum foil is the carrier of the adhesive layer, and its quality has a great influence on the heat seal strength of the product. In particular, oil stains on the surface of the original aluminum foil will weaken the adhesion between the adhesive and the orig ...

How is aluminum foil produced?

Cast-rolled aluminum foil production process Aluminum liquid, aluminum ingot -> Smelt -> Continuous roll casting -> Winding -> Cast roll finished product Plain foil production process Plain foil -> Cast-rolled coil -> Cold rolled -> Foil rolling -> Slitting -> Annealing -> Plain foil finished product The manufacture of aluminum foil is similar to making pasta at home. A large b ...

Selection principle of aluminum foil pass processing rate

The selection principle of pass processing rate is as follows: (1) Under the premise that the equipment capacity allows the rolling oil to have good lubrication and cooling performance, and can obtain good surface quality and shape quality, the plasticity of the rolled metal should be fully utilized, and the large pass processing rate should be used as much as possible to improve the rolling mill Production ef ...