coated aluminum foil

Aluminum foil for coated foil

aluminium foil specification Aluminum foil for coated foil Coated Products gauges/thicknesses 0.00035” - .010” Coating thicknesses .002″ Width .250” - 54.50” Length customize aluminum foil for coated foil We offer a variety of Coated Products Carbon coated aluminum foil Heat Seals Corrosion Resistant Epoxies Slip Lubes Print Primers Release Coatings, ...

roll aluminum foil wrapping

Aluminum foil for wrapping

  Application Food wrapping: chocolate, sandwich, burger etc

aluminum foil for transformers

Aluminum foil for transformer

Aluminium foil general parameters for transformers Alloy 1050/1060/1070/1350 Aluminium foil for transformer Temper 0 Thickness 0.2--4mm Width 20-1650mm Thickness deviation 76 The width of the deviation 500 Thickness tolerance ≦5 Brightness L ≦60 wettability Class A (Brush test) Tensile strength(Mpa) At customer's request Elongation δ% (Scaling i ...

PTP aluminum blister foil

PTP aluminum Blister foil parameter Alloy 1235, 8011, 8021 etc Temper  O( HO ), H18, etc Width 300mm, 600mm, etc Thickness OP: 0.5 - 1.5 g/m2 Aluminum foil: 20 micron ( 0.02mm ), 25 micron ( 0.025mm ), 30 micron ( 0.3mm ) etc HSL ( VC ):3 - 4.5 gsm Primer: 1gsm Surface treatment Laminated, printing, Single bright side, etc what is PTP aluminum blister ...

insulation aluminum foil

Aluminum foil for insulation

Parameters Alloy: 1100, 1145, 8011 etc Temper: O ( HO ), H22 etc Thickness: 15 micron ( 0.015mm ), 40 micron ( 0.04mm ) etc Width: 200mm, 1400mm etc About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high qualit ...

aluminum foil thick

Thick aluminum foil

Single zero aluminum foil refers to aluminum foil with a thickness between 0.1mm ( 100 micron ) and 0.2mm ( 200 micron ). Such as 0.1mm ( 100 micron ), 0.2mm ( 200 micron ) etc Application Food container, battery, transformer etc

Semi-rigid container foil and surface oiling treatment

Pre-coated aluminum foil used for punching various containers, commonly used alloy 8011, 3003, 3004, 1145, etc., thickness is 0.02-0.08mm. Oiling thickness is 150-400mg/m². The use of aluminum foil as a semi-rigid container to hold food has been widely adopted at home and abroad. With the continuous development of the national economy and the continuous improvement of people’s living standards, people’s health ...

Professional knowledge of tension system of aluminum foil slitting machine

After printing and coating, aluminum foil paper and cash register paper need to be post-printed and slit on a slitting machine to cut large rolls of semi-finished products into the required specifications. The semi-finished products that run on the slitting machine are an unwinding and rewinding. This process includes two parts: machine speed control and tension control. The so-called tension is to pull the al ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...

Can we put the aluminum foil in the air fryer?

As the name suggests, an air fryer is a machine that uses air to "fry" food. It by using the principle of high-speed air circulation, mainly through the heating tube to heat the air, and then the fan will air into high-speed circulation heat flow, when the food is heating, hot air convection can make food fast dehydration, the oil of baking food itself, in the end, become golden crispy food surface, appear simila ...

Development of domestic double zero foil project

Only China, the United States, Japan and Germany can produce double zero foils with a thickness of 0.0046mm in the world. From a technical point of view, it is not difficult to produce such thin foils, but it is not easy to efficiently produce high-quality double-zero foils on a large scale. At present, many enterprises in my country can realize the commercial production of double zero foil, mainly including: ...

Features of aluminum foil rolling

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...