8011 alloy aluminum foil is added Al-Fe-Si elements, more than 1% of the total alloying elements in the corresponding performance of its alloy has a higher advantage, mainly for food packaging, pharmaceutical packaging. Machinable range of thickness: 0.02mm-0.07mm, width 300mm-1100mm, can be customized according to customer needs. Parameters Type 8011 aluminium foil State F, O ( HO ), H14, H ...
Alloy: 8011 Thickness: 0.006mm - 0.009mm Width: 500mm - 1600mm Features of aluminum foil bags Strong air barrier performance, anti-oxidation, waterproof and moisture-proof. Strong mechanical properties, high blast resistance, strong puncture and tear resistance. High temperature resistance (121°C), low temperature resistance (-50°C), oil resistance and good fragrance retention performanc ...
Generally, aluminum foil is made of 1000 series, 3000 series, 8000 series alloys. The most commonly used alloys are 8011. Different alloys have different uses, we can customize various alloy models according to the requirements of customers. Alloy 1 series: 1235 etc 3 series: 3003 etc 8 series: 8011, 8079 etc According to the temper, aluminum foil can be divided into hard foil, semi-rigid foil ...
Standard thickness: 12 mic Size: 8x8 cm, 9x9 cm, 10x10 cm, 12x12 cm, 15x15 cm, 20x20 cm ( customized ) Color: silver, gold, red, purple, pink, blue, gree, brown, rose red etc Surface treatment: smooth, fine grille, orange peel pattern It can be used for packing and wrapping handicraft products. Suitable for multifarious candies, such as confections, chocolate, sweets, dessert, tea leaves etc ...
https://www.youtube.com/watch?v=ZR_JvbVongU The shocking statistics released by the National Center for Cardiovascular Diseases suggest that China has the highest occurrence of sudden cardiac deaths (SCD) in the world, accounting for over 544,000 deaths annually. That is to say, SCDs occur at a rate of 1,500 people/day or one person/minute in China. According to David Jin, general manager of Henan Huawei Alumi ...
Common aluminum foil materials are 8011 aluminum foil and 1235 aluminum foil. The alloys are different. What's the difference? Aluminum foil 1235 aluminum foil is different from 8011 aluminum foil alloy. The process difference lies in the annealing temperature. The annealing temperature of 1235 aluminum foil is lower than that of 8011 aluminum foil, but the annealing time is basically the same. 8011 aluminum foi ...
Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...
The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...
In the production process of aluminum foil, there are multiple processes such as rolling, finishing, annealing, packaging, etc. The interlocking production process, any problem in any link may cause aluminum foil quality problems. The quality defects of the purchased aluminum foil products will not only affect the appearance, but also directly affect the quality of the products produced, and even more directly ca ...
It is a characteristic of aluminum box rolling that the thickness deviation is difficult to control. The thickness difference of 3% is not difficult to control in the production of plate and strip, but it is more difficult to control in the production of aluminum foil. As the thickness of the aluminum box becomes thinner, its micro-conditions can affect it, such as temperature, oil film, and oil and gas concen ...