household foil

Aluminum foil for household

what is House hold Aluminium Foil? Household Aluminium Foil ( HHF ) has many special characteristics: rich polish, lightweight, anti-damp, anti-pollute and is the well transmit electricity body. It has been used vastly in the shield layer of the food vessel, electron, material equipment, and communication cable. We can supply aluminum foil thickness from 0.0053-0.2mm, and width from 300-1400mm. Alloy includes 80 ...

aluminum foil pots

Aluminum foil for pot

Parameters of aluminum foil for pot container foil Alloy status 8011-H24, 3003-H24, 8011-H22 Typical thickness 0.02~0.20mm Processing method stamping forming Application of Aluminum foil for pot Aluminum foil production process

aluminum strip foil for pills foil packaging

Easy tear aluminum strip foil for medicine

It uses two layers of medicinal strip packaging film (SP) to sandwich the medicines. The distance between the unit medicines is a certain interval. The inside of the two SP films near the medicines are heat-sealed on the strip vacuum packaging equipment. A form of unit packaging formed by pressing tooth marks in between. Strip packaging is continuous work on strip vacuum packaging equipment, which is especially s ...

aluminum foil thick

Thick aluminum foil

Single zero aluminum foil refers to aluminum foil with a thickness between 0.1mm ( 100 micron ) and 0.2mm ( 200 micron ). Such as 0.1mm ( 100 micron ), 0.2mm ( 200 micron ) etc Application Food container, battery, transformer etc

Is tin foil the same as aluminum foil?

Now the aluminum foil we see in the market is no longer made of tin, because it is more expensive and less durable than aluminum. The original tin foil (also known as tin foil) is really made of tin. Tin foil is softer than aluminum foil. It will smell tinted to wrap food. At the same time, tin foil cannot be heated due to its low melting point, or the heating temperature is high-such as 160 It begins to becom ...

Aluminum foil rolling process and characteristics

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

The aluminum foil rolling mill back-up roll bearing and inner ring are successfully developed

In recent years, Huawei Aluminum Co., Ltd. has set up a special research team under the condition that the aluminum foil rolling mill backing roll and the inner ring of the backing roll bearing are tight, to maintain production by repairing the scrapped backing rolls, and to ensure the normal operation of the seven aluminum foil rolling mills. During the repair process, the research team was able to repair, explo ...

What is the difference between aluminum foil lunch boxes and traditional disposable lunch boxes?

Aluminum foil lunch boxes made of aluminum foil can be processed into various shapes and are widely used in food packaging such as pastry baking, airline catering, takeaway, cooked food, instant noodles, instant lunch and other food fields. The aluminum foil lunch box has a clean appearance and good thermal conductivity. It can be heated directly on the original packaging with ovens, microwave ovens, steamers and ...

What are the causes of foil coiling defects?

Coiling defects mainly refer to loose, layer channeling, tower shape, warping and so on. Aluminum foil roll during the winding process. Because the tension of aluminum foil is limited, enough tension is the condition to form a certain tension gradient. Therefore, the winding quality ultimately depends on good shape, reasonable process parameters and suitable precision sleeve. It is ideal to obtain tight coils ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...