industrial aluminum foil roll

Aluminum foil for industrial use

Parameters of industrial grade aluminum foil Alloy: 3003, 8011 etc Applications of industrial used aluminum foil Insulation, low temperature resistant, al pe laminited for packing, beverage industrial use and wine use etc

Aluminum foil for honeycomb

Honeycomb aluminum foil is generally 3003 alloy, h18 state, and the thickness is between 0.03-0.08mm, mostly between 0.04-0.06mm. There is also a small amount of 5052 alloy honeycomb aluminum foil, but due to the high cost and low consumption, the product has strict requirements on the plate shape and thickness, and lower requirements on the plate surface. Typical alloy 3003 5052 Temper O,H14, H16, ...

food aluminum foil roll

Aluminum foil for food

Parameters Alloy: 1235, 8011 etc Application: food-grade packaging bag, food wrapping etc Food grade aluminum foil is mainly used for food and quasi-food packaging, the thickness is 0.015, 0.012, 0.009, 0.007 microns, and the aluminum alloys are 1145, 1235, 1100, 3003, 8011, 8079, and so on. The performance requirements for food-grade aluminum foil are strict because it is connected to the food directly. ...

aluminum foil laminated for bag

Aluminum foil for packaging bag

Alloy: 8011 Thickness: 0.006mm - 0.009mm Width: 500mm - 1600mm Features of aluminum foil bags Strong air barrier performance, anti-oxidation, waterproof and moisture-proof. Strong mechanical properties, high blast resistance, strong puncture and tear resistance. High temperature resistance (121°C), low temperature resistance (-50°C), oil resistance and good fragrance retention performanc ...

Custom printing aluminum foil jumbo roll

The printing process and precautions of aluminum foil for medicine packs The process flow of packaging aluminum foil is: aluminum foil unwinding -> gravure printing -> drying -> protective layer coating -> drying -> adhesive layer coating -> drying -> aluminum foil winding. In order to achieve the above-mentioned performance requirements in the PTP aluminum foil printing and coating produc ...

Features of aluminum foil rolling

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

Discuss the influencing factors of the barrier performance of aluminum foil composite soft packaging materials

As a metal material, aluminum foil is non-toxic, tasteless, has excellent electrical conductivity and light-shielding properties, extremely high moisture resistance, gas barrier properties, and its barrier performance is incomparable and irreplaceable by any other polymer materials and vapor-deposited films. of. Perhaps it is precisely because aluminum foil is a metal material completely different from plastic, i ...

Are aluminum foil lunch boxes poisonous?

Aluminum foil lunch box is a new type of non-toxic and environmentally friendly tableware. 1. The main ingredient in the aluminum foil lunch box is aluminum, so it will react with acid like aluminum cans, and the salt produced by aluminum and organic acids will react with gastric acid to produce aluminum chloride, so we need to use it. Note that, generally speaking, it is often used for steaming rice. There is ...

How is aluminum foil produced?

Cast-rolled aluminum foil production process Aluminum liquid, aluminum ingot -> Smelt -> Continuous roll casting -> Winding -> Cast roll finished product Plain foil production process Plain foil -> Cast-rolled coil -> Cold rolled -> Foil rolling -> Slitting -> Annealing -> Plain foil finished product The manufacture of aluminum foil is similar to making pasta at home. A large b ...

Professional knowledge of tension system of aluminum foil slitting machine

After printing and coating, aluminum foil paper and cash register paper need to be post-printed and slit on a slitting machine to cut large rolls of semi-finished products into the required specifications. The semi-finished products that run on the slitting machine are an unwinding and rewinding. This process includes two parts: machine speed control and tension control. The so-called tension is to pull the al ...

Why should the mask bag be made of aluminum foil?

Nowadays, many female companions attach great importance to beauty and skin care. Women who are busy with their lives and work often use facial masks for skin care, which can provide sufficient nutrients for the facial skin and make the skin healthier and more energetic. With the increasing demand for facial masks, many manufacturers now make and produce facial masks. In order to improve the storage time of facia ...