aluminum foil roll jumbo

Custom alloy aluminum foil jumbo roll

Generally, aluminum foil is made of 1000 series, 3000 series, 8000 series alloys. The most commonly used alloys are 8011. Different alloys have different uses, we can customize various alloy models according to the requirements of customers. Alloy 1 series: 1235 etc 3 series: 3003 etc 8 series: 8011, 8079 etc According to the temper, aluminum foil can be divided into hard foil, semi-rigid foil ...

1145 aluminum foil

1145 alloy aluminum foil

1145 aluminum foil general parameters Alloy 1145 aluminum foil Temper O, H18, H19 Product Style coil, roll Thickness 0.01-0.2mm,0.0005 to 0.064 inches Width 100-1600mm,0.375 to 60 inches Length(mm) customization Thickness tolerance +/- 2% Performance One is high plasticity and corrosion resistance, and the other is electrical and thermal conductivity, which can ...

pvc foils capsules

Aluminum foil for capsule packaging

Product type PTP aluminum blister foil Cold form alu alu foil About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high quality aluminum material products custom OEM services. If you want to get the newest and best prices b ...

aluminum foil roll for container

Aluminum foil for food container

Parameters Double bright side Alloy: 3003, 8011 etc Temper: O ( HO ), H22, H24 etc Thickness: 20 micron, 200 micron etc Width: 100mm, 600mm etc Application Aluminum foil for tray Aluminum foil for bowl Aluminum foil for cup Aluminum foil for pan Aluminum foil for foil plate Aluminum foil for pot About us Henan Huawei Aluminum Co., Ltd. is the leader of many alumin ...

cable aluminum foil

Aluminum foil for cable

The outer surface of the cable needs to be wrapped with a layer of aluminum foil for protection and shielding. This kind of aluminum foil is usually made of 1145 grade industrial pure aluminum. After continuous casting and rolling, cold rolling, slitting and complete annealing, it is divided into small coils according to the length required by the user and supplied to the cable foil compounding plant. The ...

custom aluminum foil

Custom aluminum foil

According to the processing state, aluminum foil can be divided into plain foil, embossed foil, composite foil, coated foil, colored aluminum foil and printed aluminum foil. Plain foil: Aluminum foil without any other processing after rolling, also called smooth foil. Embossed foil: aluminum foil with various patterns embossed on the surface. Composite foil: composite aluminum foil formed by pastin ...

The aluminum foil rolling mill back-up roll bearing and inner ring are successfully developed

In recent years, Huawei Aluminum Co., Ltd. has set up a special research team under the condition that the aluminum foil rolling mill backing roll and the inner ring of the backing roll bearing are tight, to maintain production by repairing the scrapped backing rolls, and to ensure the normal operation of the seven aluminum foil rolling mills. During the repair process, the research team was able to repair, explo ...

What is the role of aluminum foil stack rolling (double rolling)?

Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...

Ways to prevent aluminum foil from degreasing

Degreasing pollution is mainly manifested on the surface of the aluminum foil in 0 state. After the aluminum foil is annealed, it is tested by the water brushing method, and it does not reach the level specified in the water brushing test. The aluminum foil that requires the water-washing test is mainly used for printing, composite with other materials, etc. Therefore, the surface of the aluminum foil must be ...

Aluminum foil rolling process and characteristics

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...