aluminum lid foil

Aluminum foil for lid

The parameters of aluminum foil for lid Alloy: 1145,1235,3003, 8011 etc Thickness: 0.012mm - 0.05mm Width: 250mm - 1000mm What are the applications about aluminum foil for lid? aluminum foil for coffee capsule lid, aluminum foil for food container lid, aluminum foil for yogurt cup lid, water cup lid etc

aluminum foil for baking pans

Custom aluminum foil for various applications

Application PS base: After surface treatment, cut into pieces for photosensitive printing. Air conditioner aluminum foil: After punching and slicing, the copper pipes are connected in series and used for the radiator in the air conditioner. Can lid foil: Used for the production material of can body and lid Beer label: After being printed on the surface, it is used at the beer cap. Medicinal foi ...

1235 aluminum foil

1235 alloy aluminum foil

Mechnical Properties Dinomination Gauge/Thickness (mm) Alloy Temper Tensile Strenght (MPa) Elogation (%) Food Container Foil 0.041 – 0.089 1235-O 45 – 100 >4 0.09 – 0.139 50 – 100 >6 0.14 – 0.20 50 – 100 >10 Application Food container etc

custom aluminum foil

Custom aluminum foil

According to the processing state, aluminum foil can be divided into plain foil, embossed foil, composite foil, coated foil, colored aluminum foil and printed aluminum foil. Plain foil: Aluminum foil without any other processing after rolling, also called smooth foil. Embossed foil: aluminum foil with various patterns embossed on the surface. Composite foil: composite aluminum foil formed by pastin ...

8006 aluminum foil

8006 alloy aluminum foil

Introduction of 8006 alloy aluminum foil 8006 alloy aluminum foil is a non-heat treatable aluminum alloy. The 8006 aluminum foil product has a bright surface and is degreasing clean. Especially suitable for making wrinkle-free lunch boxes. Huawei Aluminum's 8006 aluminum foil adopts hot rolling method, and the tensile strength is between 123-135Mpa. Technical parameters of aluminum foil 8006 Alloy 8 ...

Semi-rigid container foil and surface oiling treatment

Pre-coated aluminum foil used for punching various containers, commonly used alloy 8011, 3003, 3004, 1145, etc., thickness is 0.02-0.08mm. Oiling thickness is 150-400mg/m². The use of aluminum foil as a semi-rigid container to hold food has been widely adopted at home and abroad. With the continuous development of the national economy and the continuous improvement of people’s living standards, people’s health ...

The order of aluminum foil in production #11151746 export to Vietnam

ITEM SIZE (MM) ALLOY / TEMPER WEIGHT (KGS)  ALUMINIUM FOIL, ID: 76MM, ROLL LENGTH: 12000 - 13000 meters 1 0.007*1270 1235 O 18000.00

What's the difference between 8011 and 1235 aluminum foil?

Common aluminum foil materials are 8011 aluminum foil and 1235 aluminum foil. The alloys are different. What's the difference? Aluminum foil 1235 aluminum foil is different from 8011 aluminum foil alloy. The process difference lies in the annealing temperature. The annealing temperature of 1235 aluminum foil is lower than that of 8011 aluminum foil, but the annealing time is basically the same. 8011 aluminum foi ...

Aluminum foil production process - ingot hot rolling method, twin roll casting method

hot ingot rolling First, the aluminum melt is cast into a slab, and after homogenization, hot rolling, cold rolling, intermediate annealing and other processes, it is continued to be cold rolled into a sheet with a thickness of about 0.4~1.0 mm as a foil blank (casting → hot rolling billet → cold rolling → foil rolling). In the ingot hot rolling method, the hot rolled billet is first milled to remove defect ...

Contribute a bit of Heat and Light, However Small they are, just Like a Firefly -David Jin, General Manager of Henan Huawei Aluminum Co., Ltd., Actively Promotes First Aid CPR and AED

https://www.youtube.com/watch?v=ZR_JvbVongU The shocking statistics released by the National Center for Cardiovascular Diseases suggest that China has the highest occurrence of sudden cardiac deaths (SCD) in the world, accounting for over 544,000 deaths annually. That is to say, SCDs occur at a rate of 1,500 people/day or one person/minute in China. According to David Jin, general manager of Henan Huawei Alumi ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...