Что такое алюминиевая фольга для кабеля?

Внешняя поверхность кабеля должна быть обернута слоем алюминиевой фольги для защиты и экранирования.. Этот вид алюминиевой фольги обычно изготавливается из 1145 чистый промышленный алюминий. После непрерывной разливки и прокатки, холодная прокатка, продольная резка и полный отжиг, он делится на небольшие бухты в соответствии с длиной, требуемой пользователем, и поставляется на завод по производству кабельной фольги.. The surface of the aluminum foil is covered with plastic. The film is cut into several small strips and supplied to the cable factory in a reel shape.

The cable foil is made by attaching a special plastic film (0.058толщина мм) on the upper and lower surfaces of 0.15mm-0.20алюминиевая фольга толщиной мм. There are two methods of attaching: dry attaching and wet attaching. The dry method uses a high temperature (200℃) roll pressing method to attach the film; the wet method uses glue. В настоящий момент, most of them use dry methods. After attaching the plastic film, use a special instrument to tear off the film from the aluminum foil to determine the degree of adhesion of the plastic film. This measurement data is very important and is called peel strength. According to the communication cable industry standard (code YD/T723.2-94), the strength should not be less than 6.13N/cm; in addition, the heat sealing strength should not be less than 17.5N/cm. The surface quality of aluminum foil is the main factor that affects the peeling strength. The main surface quality problems are oil spots, corrosion, and over-oxidation.

The cable foil uses the airtightness and shielding properties of aluminum foil, and is coated with plastic film on one or both sides to form an aluminum #plastic composite foil, which is used as a cable shield. The cable foil needs to have a small amount of oil on the outside, no holes, and high mechanical properties. Вообще говоря, the length of the cable aluminum foil is extremely strict.

Why use aluminum foil for cables

Aluminum foil is commonly used as a cable shielding material for a number of reasons, including its effectiveness against electromagnetic interference (ЭМИ) и радиочастотные помехи (RFI), гибкость, and cost-effectiveness. Here are some key reasons why aluminum foil is used in electrical cables:

EMI and RFI Shielding: Aluminum foil provides excellent electromagnetic interference (ЭМИ) и радиочастотные помехи (RFI) shielding properties. It acts as a barrier that reflects and absorbs electromagnetic waves, preventing them from penetrating the cable and interfering with the signals carried by the inner conductors.

Гибкость: Aluminum foil is highly flexible and can conform to the shape of the cable, making it suitable for a variety of cable designs and configurations.

Легкий вес: Aluminum foil is a lightweight material, and using aluminum foil as a shield does not significantly increase the weight of the cable.

Устойчивость к коррозии: Aluminum foil has natural corrosion resistance due to the thin oxide layer formed on its surface.

Почему выбрали нас?

Хэнань Huawei Aluminium Co., ООО. является лидером среди многих производителей и поставщиков алюминия в Китае.. Мы строго контролируем качество и ориентируемся на клиентов. Мы надеемся на всестороннее сотрудничество с вами и предоставить вам высококачественные изделия из алюминиевого материала на заказ OEM.. Если вы хотите получить самые новые и лучшие цены за кг или за тонну стандартного веса, пожалуйста свяжитесь с нами.

Линия по производству алюминиевой фольги

Упаковка

  • Упаковка: Деревянная коробка
  • Стандартная спецификация деревянного ящика: Длина * Ширина * Высота = 1,4 м * 1,3 м * 0,8 м
  • Когда-то понадобилось,размер деревянного ящика может быть изменен по мере необходимости.
  • На деревянный ящик Вес брутто: 500-700Кг Вес нетто: 450-650КГ
  • Замечание: Для особых требований к упаковке, соответствующие должны быть добавлены соответственно.