তারের জন্য অ্যালুমিনিয়াম ফয়েল কি??

সুরক্ষা এবং রক্ষার জন্য তারের বাইরের পৃষ্ঠটি অ্যালুমিনিয়াম ফয়েলের একটি স্তর দিয়ে মোড়ানো প্রয়োজন. এই ধরনের অ্যালুমিনিয়াম ফয়েল সাধারণত তৈরি হয় 1145 গ্রেড শিল্প খাঁটি অ্যালুমিনিয়াম. ক্রমাগত ঢালাই এবং রোলিং পরে, ঠান্ডা ঘূর্ণায়মান, slitting এবং সম্পূর্ণ annealing, it is divided into small coils according to the length required by the user and supplied to the cable foil compounding plant. The surface of the aluminum foil is covered with plastic. The film is cut into several small strips and supplied to the cable factory in a reel shape.

The cable foil is made by attaching a special plastic film (0.058mm thick) on the upper and lower surfaces of 0.15mm-0.20মিমি পুরু অ্যালুমিনিয়াম ফয়েল. There are two methods of attaching: dry attaching and wet attaching. The dry method uses a high temperature (200℃) roll pressing method to attach the film; the wet method uses glue. বর্তমানে, most of them use dry methods. After attaching the plastic film, use a special instrument to tear off the film from the aluminum foil to determine the degree of adhesion of the plastic film. This measurement data is very important and is called peel strength. According to the communication cable industry standard (code YD/T723.2-94), the strength should not be less than 6.13N/cm; in addition, the heat sealing strength should not be less than 17.5N/cm. The surface quality of aluminum foil is the main factor that affects the peeling strength. The main surface quality problems are oil spots, corrosion, and over-oxidation.

The cable foil uses the airtightness and shielding properties of aluminum foil, and is coated with plastic film on one or both sides to form an aluminum #plastic composite foil, which is used as a cable shield. The cable foil needs to have a small amount of oil on the outside, no holes, and high mechanical properties. সাধারণভাবে বলতে, the length of the cable aluminum foil is extremely strict.

Why use aluminum foil for cables

Aluminum foil is commonly used as a cable shielding material for a number of reasons, including its effectiveness against electromagnetic interference (ইএমআই) এবং রেডিও ফ্রিকোয়েন্সি হস্তক্ষেপ (আরএফআই), নমনীয়তা, and cost-effectiveness. Here are some key reasons why aluminum foil is used in electrical cables:

EMI and RFI Shielding: Aluminum foil provides excellent electromagnetic interference (ইএমআই) এবং রেডিও ফ্রিকোয়েন্সি হস্তক্ষেপ (আরএফআই) shielding properties. It acts as a barrier that reflects and absorbs electromagnetic waves, preventing them from penetrating the cable and interfering with the signals carried by the inner conductors.

নমনীয়তা: Aluminum foil is highly flexible and can conform to the shape of the cable, making it suitable for a variety of cable designs and configurations.

হালকা ওজন: Aluminum foil is a lightweight material, and using aluminum foil as a shield does not significantly increase the weight of the cable.

জারা প্রতিরোধের: Aluminum foil has natural corrosion resistance due to the thin oxide layer formed on its surface.

কেন আমাদের নির্বাচন করেছে?

হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড. চীনে অনেক অ্যালুমিনিয়াম উত্পাদন এবং সরবরাহকারীদের নেতা. আমরা কঠোরভাবে মান নিয়ন্ত্রণ এবং গ্রাহকদের উপর ফোকাস. আমরা আপনার সাথে গভীর সহযোগিতা আশা করি এবং আপনাকে উচ্চ মানের অ্যালুমিনিয়াম উপাদান পণ্য কাস্টম OEM পরিষেবা সরবরাহ করব. আপনি যদি প্রতি কেজি বা প্রতি টন স্ট্যান্ডার্ড ওজন অনুসারে নতুন এবং সেরা দাম পেতে চান, আমাদের সাথে যোগাযোগ করুন.

অ্যালুমিনিয়াম ফয়েল উত্পাদন লাইন

মোড়ক

  • প্যাকেজ: কাঠের ক্ষেত্রে
  • স্ট্যান্ডার্ড কাঠের কেস স্পেসিফিকেশন: দৈর্ঘ্য*প্রস্থ*উচ্চতা=1.4মি*1.3মি*0.8মি
  • একবার প্রয়োজন,কাঠের কেস মাত্রা প্রয়োজন হিসাবে পুনরায় ডিজাইন করা যেতে পারে.
  • কাঠের কেস প্রতি মোট ওজন স্কেল: 500-700কেজি নেট ওজন: 450-650কেজি
  • মন্তব্য: বিশেষ প্যাকেজিং প্রয়োজনীয়তা জন্য, সংশ্লিষ্ট অনুযায়ী যোগ করা হবে.