Принципот на избор на стапка на обработка на помине е како што следува:
(1) Под претпоставка дека капацитетот на опремата овозможува маслото за тркалање да има добри перформанси за подмачкување и ладење, и може да добие добар квалитет на површината и квалитет на обликот, пластичноста на валаниот метал треба целосно да се искористи, and the large pass processing rate should be used as much as possible to improve the rolling mill Production efficiency.
(2) Pass processing rate, fully consider the performance of the rolling mill, process lubrication, tension, original roll shape, and rolling speed. The rolling pass processing rate of the original or semi-hard aluminum foil blank is generally 40%-65%, and the rolling pass processing rate of the hard aluminum foil blank is generally 20%-40%.
(3) For products with high requirements for thickness deviation, surface quality, and shape quality, a smaller pass processing rate should be selected.
(4) For rolling mills with automatic thickness control system and strip shape automatic control system, a larger pass processing rate can be appropriately adopted.
(5) The selection of pass processing rate should be based on the actual situation, and finally determined after continuous exploration and summary based on equipment, квалитет, production efficiency and other conditions in field practice.
