Air-conditioning is indispensable to escape the heat in summer. Kun ilmastointi tulee tuhansiin kotitalouksiin, se myös kehittyy jatkuvasti. Nykyisessä, ilmastointilaitteet kehittyvät vähitellen miniatyrisoinnin suuntaan, korkea hyötysuhde, ja pitkä elämä. The air-conditioning heat exchange fins are also correspondingly developed in the direction of ultra-thin and high strength. In the 1980s, the thickness of the heat exchange fins was 0.15-0.2 ram, but nowadays, the thickness is only between 0.09 ja 0.15 mm. In order to increase the life of the air conditioner, reduce the power consumption, improve the ventilation quality and increase the refrigeration effect, a variety of functions of heat fins have been produced.
The air-conditioning foil has a thickness of 0.1mm to 0.15mm. With the development of technology, there is a trend of further thinning of air-conditioning foils. Today, the thickness of Japan’s leading product is 0.09mm. In the ultra-thin state, aluminum foil must have good formability, its arrangement and performance must be uniform, less metallurgical defects, and small anisotropy. Samaan aikaan, it needs high strength, hyvä sitkeys, uniform thickness, and good flatness. The standards and alloys of air-conditioning foils are relatively simple and suitable for large-scale production. kuitenkin, the market has strong seasonality. Professional manufacturers of air-conditioning foils can hardly deal with the contradiction between oversupply in peak seasons and no need in cold seasons.
Due to the weak stock market demand, the production capacity and skill level of China’s air-conditioning foil have been continuously improved in recent years, and a group of companies producing air-conditioning foils of large, medium and small, high, middle and low levels has been formed. The product quality of some large companies such as North China Aluminum and Bohai Aluminum It has basically reached the world’s leading level. Because of the overcapacity of domestic production, market competition is extremely fierce.
Air conditioner aluminum foil can be divided into 7 categories according to its processing technology and performance characteristics.
Non-coated aluminum foil refers to aluminum foil that has been rolled and annealed without any form of treatment on the surface. Maassani 10 vuosia sitten, ja noin 15 vuosia sitten, the aluminum foils used for heat exchangers in air conditioners were all non-coated aluminum foils. Jopa tällä hetkellä, noin 50% of the heat exchange fins used in developed countries are still uncoated aluminum foil, ollessani maassani, tämä suhde on noin 60%.
The so-called coated aluminum foil is to reprocess the surface of non-coated aluminum foil to make it have a certain special function. In countries with fast technological development such as Japan and Germany, coated aluminum foil has been used for more than 15 vuotta. Maassani, päällystetyn alumiinifolion käyttö ei ylitä 10 vuotta.
Korroosionkestävän alumiinifoliotuotteen pinnalla on tietty korroosionsuojakerros. The air-conditioning heat exchange sheet made of this product can be applied to relatively harsh areas and can significantly increase the service life of the air conditioner. Samaan aikaan, lämmönvaihtolevyn korroosionkestävyyden paranemisen vuoksi, pintakorroosiojauheen muodostuminen vähenee huomattavasti, parantaa siten ilmanvaihdon laatua ja puhdistaa ilmastoidun huoneen ilmaa.
Hydrofobista alumiinifoliota kutsutaan myös vettä hylkiväksi alumiinifolioksi, ja sen pintaominaisuudet ovat juuri päinvastaiset kuin hydrofiilisen alumiinifolion. Tuo on, kun kondensoitunut vesi tiivistyy alumiinifolion pinnalle, the contact angle with the aluminum foil is relatively large, yleisesti 75. the above. Mitä suurempi kulma, sitä parempi vettä hylkivä. The ultimate goal of using hydrophobic aluminum foil is the same as that of hydrophilic aluminum foil, tuo on, estääksesi kondenssivettä jäämästä lämmönvaihtorivien väliin. The difference is that the hydrophobic aluminum foil achieves the purpose of removing the condensed water between the heat exchange fins by increasing the contact angle between the condensate water and the heat exchange fins, so that the condensate water forms droplets that are easy to slide down.
In the process of processing and manufacturing air-conditioning heat exchange fins, lubricating oil is generally added to the surface, sitten lävistys ja laippaus, and finally trichloroethylene is used to wash off the lubricating oil. Koska trikloorietyleeni on haitallista ihmiskeholle, tämän prosessin vähentämiseksi, a self-lubricating aluminum foil is produced accordingly. Kuten nimestä voi päätellä, self-lubricating aluminum foil does not need to be lubricated separately during its punching process, ja voitelu lävistyksen aikana kestää esikäsitellyn kalvon alumiinifolion pinnalla. Koska voiteluöljyä ei tarvitse lisätä, the subsequent cleaning and drying process of trichloroethylene is omitted.
The anti-mold aluminum foil is mainly used for the indoor unit of the air die. Its main function is to prevent the surface of the heat exchange fins from being moldy due to use or storage for a long time, thereby significantly improving the air conditioning quality and preventing abnormal odors. Improve the air-conditioned indoor environment.
Henan Huawei Aluminium Co., Oy. on monien alumiinin valmistajien ja toimittajien johtaja Kiinassa. Valvomme tiukasti laatua ja keskitymme asiakkaisiin. Toivomme syvällistä yhteistyötä kanssasi ja tarjoamme sinulle korkealaatuisia alumiinimateriaalituotteita räätälöityjä OEM-palveluita. Jos haluat saada uusimmat ja parhaat hinnat kilolta tai tonnin vakiopainolta, ota meihin yhteyttä.
