Laminated Aluminum Foil AA1235: Σύνθετη δομή, Properties and Supply Guide

ΕΝΑ laminated aluminum foil AA1235 is a high-purity, soft-tempered foil that is bonded with paper or polymer films to form a flexible multilayer barrier.

In other words, the aluminum web is rarely used alone. Αντί, it is combined with layers such as PET, BOPP, PE or paper so that each material contributes a specific function.

This matters because a single thin foil, although an excellent barrier, is delicate and cannot heat-seal to itself. Πρώτα, the polymer layers protect the soft metal from abrasion and punctures.

Επόμενος, the inner seal layer allows the pack to be closed on standard filling equipment. Τελικά, the printed outer layer carries the brand identity that buyers see on the shelf.

This guide explains how the composite is built, why alloy 1235 is chosen for the core, and how the layers are bonded without delamination.

It also covers barrier performance, common structures, εφαρμογές, specifications and the documents a buyer should verify.

A deeper technical view of the same material is available on our 1235 aluminum foil as the core layer in food composite films page.

Quick specification overview for laminated aluminum foil AA1235

Παράμετρος Typical arrangement
Κράμα ΑΑ1235, 1σειρά XXX, Ο Αλ >=99.35%
Ιδιοσυγκρασία Ο (μαλακός, annealed); H18 available for stiffer webs
Foil gauge 5.5-30 μικρόν; 6-9 micron common for thin laminates
Πλάτος 50-1950 mm; 100-1600 mm most common
Surface Η μία πλευρά φωτεινή, one side matt
Typical structures PET/AL/PE, Paper/AL/PE, BOPP/AL/PE
Seal layer LDPE or heat-seal coating, matched to the line
Standards ASTM B479, AMS/QQ-A-1876
Barrier WVTR below 0.005 g/m2/day in a sound laminate

 

1. What Is Laminated Aluminum Foil AA1235?

Why Foil Is Laminated in the First Place

To begin with, lamination is the process of bonding two or more flexible webs into one continuous material.

The webs are joined with adhesive, extrusion coating or heat, and they then run through the converter as a single film.

For packaging, the aluminum foil normally sits in the middle as the barrier layer.

Finished rolls of laminated composite film built around a soft 1235 foil core.
Finished rolls of laminated composite film built around a soft 1235 foil core.

Ουσιαστικά, the construction combines materials that would be inadequate on their own. Για παράδειγμα, a pure PE film is cheap and easy to seal but leaks oxygen and moisture.

By contrast, a thin aluminum foil blocks light, gas and vapor almost completely, yet it tears easily and cannot be heat-sealed without a polymer face. Επομένως, joining the two creates a web that is both protective and practical.

Στην πράξη, the converter chooses the stack before production. Each layer is specified by material, thickness and surface treatment, and the finished roll is tested for bond strength and barrier.

Ως αποτέλεσμα, the buyer receives a ready-to-run web rather than separate components.

2. Understanding AA1235: A High-Purity 1xxx Alloy

Καθαρότητα, Softness and Surface Finish

Κράμα 1235 belongs to the 1xxx series of industrial pure aluminum. In this series, the aluminum content is at least 99.35 percent, and only small amounts of iron, silicon and other trace elements remain.

That high purity gives the foil its characteristic softness and clean, bright surface.

 Jumbo rolls of soft 1235 foil before slitting and lamination.
Jumbo rolls of soft 1235 foil before slitting and lamination.

In the soft O temper, the foil is fully annealed. Κατά συνέπεια, it is ductile and easy to fold, form and bond without cracking. It also conforms closely to the adhesive, which helps the layers grip one another.

For this reason, O temper is the default choice for most flexible lamination.

The surface is usually supplied with one bright side and one matt side. The bright face offers a high gloss for decorative work, while the matt face provides a uniform, low-reflection finish.

Εξάλλου, a clean, oil-free surface is essential because even a thin residue can weaken the adhesive bond.

At 2.70 g/cm3, the alloy is light, and its density stays constant across every temper. Επομένως, the weight of a laminate can be estimated reliably from the foil gauge and width.

This predictability is useful when planners calculate material cost and roll length.

Τελικά, proper storage protects the material before conversion. ΕΝΑ laminated aluminum foil AA1235 roll should be kept dry, sealed and away from direct heat, because moisture at the edge can weaken the bond.

Επομένως, warehouses control humidity and use the rolls in batch order. When these simple rules are followed, the web reaches the line in the same condition it left the mill.

3. AA1235 vs 8011 vs 8079: How to Choose

Δύναμη, Pinholes and Cost Trade-offs

Buyers often compare 1235 με 8011 και 8079 because all three are rolled into thin packaging foil. Ωστόσο, they are not interchangeable.

The 8xxx alloys contain added iron and silicon, which make the foil stronger and stiffer. By contrast, 1235 is purer and softer, with fewer pinholes and a higher gloss.

Table 1. How the common packaging foil alloys compare

Χαρακτηριστικό ΑΑ1235 8011 / 8079
Σειρά 1xxx pure aluminum 8xxx Al-Fe-Si alloys
Al content >=99.35% γύρω 98-98.5%
Temper feel Soft and highly ductile Stronger and more rigid
Pinholes Very few at a given gauge Slightly more, gauge dependent
Surface gloss Ψηλά, bright finish Καλός, less decorative
Typical role Laminated core, barrier web Containers, καπάκια, stiff packs
Main advantage Clean, μαλακός, easy to bond Higher mechanical strength

 

For a flexible laminate, the softness of 1235 is usually an advantage rather than a weakness. The polymer layers provide the mechanical strength, so the foil itself does not need to be rigid.

Εν τω μεταξύ, its low pinhole count protects the barrier, and its bright surface supports premium printing.

That said, there are cases where an 8xxx alloy is the better fit. Για παράδειγμα, a rigid container or a heavily formed lid may need the extra strength of 8011.

Ομοίως, a web that must withstand rough handling without polymer support may favor 8079. Επομένως, the choice should follow the structure and the forming process, not price alone.

4. Anatomy of a Composite Foil

Εξωτερικό στρώμα, Core Foil and Seal Layer

A typical composite foil is built in three functional zones. Πρώτα, the outer layer faces the outside world and carries the print.

Επόμενος, the core foil provides the barrier. Τελικά, the inner layer contacts the product and forms the heat seal. Each zone has a clear job, and the design only works when all three are balanced.

Edge view of a laminate with distinct outer, core and seal layers.
Edge view of a laminate with distinct outer, core and seal layers.

The outer layer is often PET, BOPP or paper. PET adds stiffness and heat resistance, while BOPP offers a crisp, glossy print surface.

Paper, από την άλλη πλευρά, gives a natural feel and good tear behavior. In every case, the outer face also shields the soft metal from scratches.

The core is the 1235 ξίφος. Even at six to nine microns, a sound foil blocks nearly all light and most gas and vapor. It is the reason the laminate can protect sensitive products for long shelf periods.

Without this metal layer, the film would rely on coated polymers, which rarely match metal at the same thickness.

Barrier: Wvtr, OTR and Pinholes

Barrier performance is described with two main figures. The water vapor transmission rate, or WVTR, measures moisture passage, while the oxygen transmission rate, or OTR, measures gas passage.

In a well-bonded aluminum laminate, the WVTR can fall below 0.005 g/m2/day and the OTR can approach zero.

Transmission-rate testing of sealed film samples in the quality laboratory.
Transmission-rate testing of sealed film samples in the quality laboratory.

Ωστόσο, these figures depend on the foil being free of pinholes. As the gauge drops, the number of pinholes tends to rise, and each hole becomes a tiny leak path.

Επομένως, the converter must balance thinness against defect control. Στην πράξη, a slightly thicker foil with fewer pinholes often outperforms a thinner, cheaper web.

The inner seal layer is usually LDPE or a heat-seal coating. It melts at a controlled temperature and bonds the pack to itself or to a tray.

Εξάλλου, it separates the aluminum from acidic or salty foods, which prevents direct contact and any risk of corrosion.

5. Common Laminated Structures

PET/AL/PE, Paper/AL/PE and BOPP/AL/PE

Over time, a few standard stacks have become common because they cover most packaging needs. The letters name the layers from outside to inside, and the number in brackets often gives the foil gauge in microns.

Για παράδειγμα, PET/AL(9)/PE means a PET outer layer, a nine-micron foil and a PE seal layer.

Table 2. Three common laminated structures and where they fit

Δομή Layer roles Typical use
PET/AL/PE Stiff print outer, metal barrier, PE seal Pouches, retort, general food
Paper/AL/PE Paper feel and print, metal barrier, PE seal Butter, wraps, carton liners
BOPP/AL/PE Glossy crisp outer, metal barrier, PE seal Σνακ, ζαχαροπλαστική, σακχάκια
PET/AL/PA variants Added nylon for toughness and forming Vacuum and formed packs
AL/LDPE extrusion Foil bonded directly with LDPE Lids, μόνωση, lidding webs

 

The PET/AL/PE stack is the most versatile option. It runs on high-speed form-fill-seal lines, tolerates retort temperatures and prints well.

For shelf-stable meals and pouches, this construction is often the first choice.

Paper/AL/PE is selected when the brand wants a paper-like texture. It is common for butter wraps, chilled products and carton liners.

Εν τω μεταξύ, BOPP/AL/PE is favored for snacks and confectionery because its glossy outer face makes the colors look sharp.

More specialized stacks add nylon, or PA, for puncture resistance, or use extrusion-coated LDPE for lids and insulation.

In each case, the stack is selected as a system rather than as separate layers. That discipline is what keeps the final pack reliable at high speed.

Εξάλλου, the chosen structure affects more than protection. Για παράδειγμα, a simpler two-layer web uses less material and may be easier to recycle, while a heavier multilayer offers longer shelf life.

Επομένως, buyers should weigh the product’s real shelf needs against material use. Στην πράξη, over-specifying the barrier adds cost without benefit, whereas under-specifying it risks returns.

6. The Lamination Process and Interlayer Bonding

Peel Strength, Wetting Tension and Delamination

The bond between the foil and its neighbors is just as important as the materials themselves. A weak interface can open under heat, moisture or flexing, and the layers then separate.

This failure, called delamination, destroys both the appearance and the barrier.

A roll-to-roll lamination line joining the foil and polymer webs.
A roll-to-roll lamination line joining the foil and polymer webs.

Before bonding, the foil surface is often treated to raise its wetting tension. A higher tension lets the adhesive spread evenly instead of pulling back into droplets.

Common treatments include corona or plasma activation, which also create reactive sites on the metal.

Peel testing to quantify the force needed to separate the layers.
Peel testing to quantify the force needed to separate the layers.

The finished bond is checked with a peel test, which pulls the layers apart and records the force. A typical target for a high-barrier web is around three newtons per fifteen millimeters of width.

Εξάλλου, the bond should retain most of its strength after temperature cycling.

Failures usually fall into a few clear modes. Adhesive failure means the glue separates cleanly from the foil, while cohesive failure means the glue itself splits. Moisture can also enter the interface and weaken the bond.

Επομένως, a stable laminate needs clean surfaces, the correct adhesive and controlled residual stress.

Our own technical note on 1235 aluminum foil composite flexible packaging describes how treated samples retain over ninety percent of their bond strength after environmental cycling.

That kind of retention is the practical mark of a stable interlayer.

7. Five Application Areas

The same 1235 laminate family serves a surprisingly wide range of products. The gauge and stack are adjusted to the product, the filling temperature and the required shelf life. Below are five areas where the material is commonly used.

Food Flexible Packaging

Pouches, sachets and stand-up packs use the standard PET/AL/PE or BOPP/AL/PE stack. The metal layer protects flavor and aroma, while the seal layer runs on form-fill-seal equipment. For snacks, coffee, spices and powdered foods, this is the core application.

Retort and Lidding

Retort pouches and lidding webs must survive sterilization at roughly 121 να 130 degrees Celsius. The soft foil tolerates this heat without losing its barrier, and the outer PET layer keeps its shape. A related family of coated webs is explained on our 8011 aluminum foil for dairy packaging page.

Cigarette and Labels

Cigarette packs and premium labels value the bright, printable face of 1235. The foil is often laminated with paper or a thin polymer, and it supports fine embossing and metallic effects. Here, the decorative role is as important as the barrier.

Cable and Insulation

In cables and building insulation, the foil is laminated with PET or LDPE to shield against moisture and electromagnetic interference. The composite is flexible enough to wrap around conductors, and the polymer face adds tear resistance. These industrial webs often use wider rolls.

Battery and Electronics

Battery and capacitor applications rely on the clean surface and consistent gauge of pure foil. The same lamination principles support tape, shielding and electronic barrier webs. A related blister construction is shown on the PTP blister aluminum foil page.

Finished packs and lidding produced from 1235-based laminates.
Finished packs and lidding produced from 1235-based laminates.

8. Specifications and Customization

A laminated aluminum foil AA1235 order can be customized across gauge, πλάτος, structure and surface. The table below summarizes the common ranges, although special requests can often be arranged.

Buyers should confirm the exact figures at the inquiry stage.

Table 3. Typical specification and barrier ranges

Item Range / note
Alloy and temper 1235-O standard; H18 for stiffer webs
Foil thickness 0.0055-0.03 mm (5.5-30 μικρόν)
Πλάτος 50-1950 mm, slit to the requested width
Surface Bright/matt, dry and oil-free
Outer layers ΚΑΤΟΙΚΙΔΙΟ ΖΩΟ, BOPP, χαρτί, PA
Seal layer LDPE or heat-seal coating
Wvtr Παρακάτω 0.005 g/m2/day in a sound laminate
Peel bond Around 3 N/15 mm, with high retention
Standards ASTM B479, AMS/QQ-A-1876
Core inner diameter 76 mm or 152 mm, as requested

 

The gauge is the main driver of material cost because it sets the amount of aluminum. Ωστόσο, a very thin web can raise processing risk and increase waste.

Επομένως, the total cost should include running performance and reject rate, not only the price per kilogram.

Επί πλέον, tolerance control deserves attention. A consistent gauge and width keep the web centered on high-speed machines, and a stable core diameter prevents sudden tension changes.

Ως αποτέλεσμα, rolls that meet tight tolerances produce fewer stops and less waste. Σε αυτή την περίπτωση, the supplier’s measurement records are as valuable as the nominal figures.

9. Why Buyers Choose HWALU

Henan Huawei Aluminium Co., Ε.Π.Ε. is an aluminum foil manufacturer based in the Gongyi aluminum cluster in Henan, Κίνα.

The company was founded in 2001 and operates integrated rolling, φινίρισμα, slitting and coating capacity for packaging foil.

Slit rolls packed on wooden pallets for export.
Slit rolls packed on wooden pallets for export.

The site covers roughly 250,000 square meters with about 1,200 people and an annual capacity of more than 200,000 τόνους.

The foil is exported to more than seventy countries, which means the documentation and packaging are aligned with international practice.

For lamination customers, HWALU can supply 1235 in the soft temper with custom gauge, width and surface treatment.

Each batch is supported by mill test certificates and traceable batch marks. Εξάλλου, the technical team reviews drawings or a sample before production, so the specification is agreed in writing.

The practical benefit is repeatable conformity. Rather than renegotiating the standard on every order, the buyer works against one approved specification and can compare incoming rolls directly with earlier shipments.

That consistency is especially valuable for long-term repeat supply.

10. Συχνές ερωτήσεις

Q: Is the foil supplied as a finished laminate or as a bare roll?

ΕΝΑ: Both are possible. HWALU can supply bare 1235 foil for a converter to laminate, or a finished multilayer web ready to run on a packaging line. The scope should be stated at the inquiry stage.

Q: Which thickness is normal for a 1235 laminate?

ΕΝΑ: Thin packaging webs commonly use six to nine microns, while the full laminated range runs from about 5.5 to thirty microns. The exact gauge depends on the barrier target, pinhole requirement and line speed.

Q: Can the foil touch food directly?

ΕΝΑ: In a laminate, the food normally contacts the PE seal layer rather than the metal. The construction is supported by food-contact documentation and migration testing, and the alloy itself is non-toxic.

Q: How is delamination prevented?

ΕΝΑ: The foil surface is treated for wetting, the correct adhesive is selected and the bond is checked with peel tests. A stable web retains most of its bond strength after heat and moisture cycling.

Q: Ποια είναι η διαφορά μεταξύ 1235 και 8011?

ΕΝΑ: 1235 is a high-purity, soft 1xxx alloy with few pinholes and a bright finish, ενώ 8011 is an Al-Fe-Si alloy with greater strength and rigidity. Soft 1235 is preferred for flexible laminated cores.

Q: Which documents should accompany an export order?

ΕΝΑ: A mill test certificate, packing list, commercial invoice and batch traceability marks should be provided. Food-contact or barrier test reports can be added when the application requires them.

11. Σύναψη

Ολικός, a laminated aluminum foil AA1235 is a carefully designed multilayer system rather than a simple coated metal.

The soft 1235 core supplies the barrier, the outer layer carries print and protection, and the seal layer closes the pack on standard equipment.

Choosing the right specification means balancing gauge, pinholes, structure, peel strength and machine behavior.

Buyers who verify the supplier’s documents, approve a first article and keep traceable batch records remove most of the avoidable risk.

In the end, that disciplined approach is what keeps a flexible package fresh, safe and consistent from the first trial to long-term repeat supply.

When the layers are chosen as one system, the laminate performs reliably at high speed and protects the product throughout its shelf life.

Γιατί να μας επιλέξετε?

Henan Huawei Aluminium Co., Ε.Π.Ε. είναι ο ηγέτης πολλών κατασκευαστών και προμηθευτών αλουμινίου στην Κίνα. Ελέγχουμε αυστηρά την ποιότητα και επικεντρωνόμαστε στους πελάτες. Ελπίζουμε να έχουμε σε βάθος συνεργασία μαζί σας και να σας παρέχουμε υψηλής ποιότητας προϊόντα από υλικά αλουμινίου προσαρμοσμένες υπηρεσίες OEM. Αν θέλετε να αποκτήσετε τις νεότερες και καλύτερες τιμές ανά κιλό ή ανά τόνο κανονικού βάρους, επικοινωνήστε μαζί μας.

Γραμμή παραγωγής φύλλου αλουμινίου

Συσκευασία

  • Πακέτο: Ξύλινη θήκη
  • Standard ξύλινη προδιαγραφή θήκης: Μήκος*Πλάτος*Ύψος=1,4μ*1,3μ*0,8μ
  • Μόλις χρειαστεί,Η διάσταση της ξύλινης θήκης θα μπορούσε να επανασχεδιαστεί όπως απαιτείται.
  • Ανά ξύλινη θήκη Ζυγαριά μικτού βάρους: 500-700KG Καθαρό Βάρος: 450-650KG
  • Παρατήρηση: Για ειδικές απαιτήσεις συσκευασίας, αντίστοιχα προστίθενται.