3003 Aluminum Foil – Comprehensive Anti-Rust and Corrosion-Resistant Alloy Foil Solution

3003 алюминий фольга, as a typical representative of aluminum–manganese alloy, uses manganese as the core alloying element (content 1.0%–1.5%). It combines excellent anti-rust and corrosion resistance, balanced mechanical strength, and good processing and forming performance. Its strength is approximately 30% higher than pure aluminum foil. It has no heat treatment strengthening capability, and its strength is optimized only through cold working.
Henan Huawei Aluminium Co., Ltd has been deeply engaged in the R&D, өндүрүш, and global export of 3003 aluminum foil for many years. Its products comply with international standards such as ASTM, In, and GB, and can meet customized requirements in multiple fields including industrial manufacturing, building insulation, and food packaging. The core product information is detailed as follows:

---

I. 3003 Aluminum Foil Export Specification Data Table

This specification table covers mainstream global export scenarios and supports customization of ultra-thin gauges, wide widths, and special tempers. Each batch of products is supplied with a Certificate of Analysis (COA) and inspection reports to ensure cross-regional compliance.

---

II. Classification and Corresponding Parameters of 3003 Алюминий фольга

According to application, бетин дарылоо, and processing temper, 3003 aluminum foil can be divided into five major categories. Each category is optimized in core parameters to suit specific application scenarios. The classifications and details are as follows:

III. Core Performance Characteristics of 3003 Алюминий фольга

3003 aluminum foil belongs to the Al–Mn alloy series. By adding manganese as the primary alloying element, its corrosion resistance, механикалык күч, and fatigue resistance are significantly improved compared with pure aluminum foil. Its overall performance is especially suitable for medium-strength, long-term service scenarios.

Химиялык касиеттер

---

Физикалык касиеттери

---

Механикалык касиеттери

---

IV. Main Application Fields of 3003 Алюминий фольга

Thanks to its excellent corrosion resistance, орточо күч, and cost control advantages, 3003 алюминий фольга is widely applied in industrial and construction-oriented scenarios where durability is prioritized over extreme softness.

1. Construction and Thermal Insulation (Primary Application)

• Building Insulation Foil:
  Used as facing material for roof insulation boards, wall insulation systems, and radiant barriers. Its high reflectivity and corrosion resistance effectively reduce heat transfer and improve building energy efficiency.
• Pipeline and HVAC Insulation:
  Applied as outer protective layers for HVAC ducts, chilled water pipes, and steam pipelines. The foil resists moisture penetration and environmental corrosion, extending service life.
• Cold Storage and Industrial Facilities:
  Used in cold rooms, refrigerated warehouses, and industrial plants where temperature stability and moisture resistance are critical.

---

2. Industrial Manufacturing and Equipment

• Honeycomb Core Material:
  3003 aluminum foil is widely used for aluminum honeycomb cores due to its strength, flatness, and bonding performance. It ensures structural stability during cutting and expansion processes.
• Heat Exchanger and Radiator Components:
  Suitable for fins and protective layers where corrosion resistance and mechanical durability are required.
• Chemical and Process Equipment Lining:
  Used as corrosion-resistant lining material in mild chemical environments.

---

3. Packaging and Container Applications

• Aluminum Foil Containers:
  Used for food trays, takeaway boxes, and semi-rigid containers. Provides better impact resistance than pure aluminum foil while maintaining acceptable formability.
• Composite Packaging Structures:
  Acts as a functional barrier layer in laminated packaging for food and non-food products, improving moisture and oxygen barrier performance.

---

4. Electronics and Shielding Applications

• Электромагниттик калкан:
  Used in cable shielding, equipment enclosures, and industrial shielding layers where moderate conductivity and high corrosion resistance are sufficient.
• Electronic Structural Foil:
  Applied in electronic components that require dimensional stability rather than high electrical conductivity.

V. Comparison Between 3003 Aluminum Foil and Other Common Aluminum Foil Alloys

As a representative Al–Mn alloy, 3003 aluminum foil differs significantly from pure aluminum foil and Al–Fe–Si alloy foil in terms of strength, коррозияга каршылык, processing behavior, and cost structure. The comparison below highlights the positioning of 3003 aluminum foil in practical applications.

Application positioning summary:

• 3003 aluminum foil is suitable for applications requiring higher strength, better corrosion resistance, and longer service life, but not extreme softness.
• 8011 aluminum foil is suitable for general-purpose packaging and forming scenarios with balanced properties.
• 1235 aluminum foil is suitable for high-ductility and deep-drawing applications where mechanical strength requirements are low.

---

VI. Typical Engineering Application Cases

Case 1: Aluminum Honeycomb Core for Transportation Industry

• Customer requirement:
  Калыңдыгы 0.05 мм, H18 temper 3003 aluminum foil for aluminum honeycomb core production, requiring stable expansion performance, uniform bonding strength, жана коррозияга каршылык.
• Чечим:
  Controlled Mn content within 1.2–1.4%, optimized rolling flatness, and strict thickness tolerance control. Supplied in coil form with low residual stress to ensure consistent expansion.
• Натыйжа:
  Honeycomb panels achieved stable mechanical performance, with improved compressive strength and long-term durability. Customer adopted the product for railway and bus interior panels.

---

Case 2: HVAC Insulation Foil for Industrial Buildings

• Customer requirement:
  Калыңдыгы 0.08 мм, H24 temper aluminum foil for HVAC duct insulation, requiring high reflectivity, коррозияга каршылык, and dimensional stability under temperature fluctuations.
• Чечим:
  Used double-side bright surface rolling, anti-oxidation surface control, and moisture-resistant packaging for long-distance transportation.
• Натыйжа:
  Product passed on-site installation testing, showing no surface corrosion after prolonged exposure in high-humidity environments.

---

Case 3: Semi-Rigid Aluminum Containers for Catering Industry

• Customer requirement:
  Калыңдыгы 0.06 мм, O temper 3003 aluminum foil for food containers, requiring improved impact resistance compared with pure aluminum foil.
• Чечим:
  Optimized annealing process to balance elongation and strength, ensuring container forming stability while maintaining sufficient rigidity.
• Натыйжа:
  Containers showed reduced deformation during transportation and handling, with improved customer satisfaction.

---

VII. Selection Guidelines for 3003 Алюминий фольга

Тандоодо 3003 алюминий фольга, the following technical factors should be evaluated comprehensively:

1. Strength requirement:
   Suitable for applications requiring higher strength than pure aluminum but lower than structural aluminum sheets.
2. Corrosion environment:
   Recommended for humid, өнөр жай, or mildly corrosive environments requiring long-term stability.
3. Forming complexity:
   Not recommended for ultra-deep drawing or complex shapes; better suited for bending, rolling, and moderate forming.
4. Service life expectations:
   Ideal for applications with long service cycles and low maintenance requirements.
5. Cost-performance balance:
   Provides improved durability at a reasonable cost compared with higher-strength aluminum alloys.

---

VIII. Кыскача

3003 aluminum foil occupies a clear position between pure aluminum foil and higher-strength aluminum alloys. Its enhanced corrosion resistance, moderate mechanical strength, and stable processing performance make it an ideal material for construction insulation, industrial manufacturing, honeycomb structures, and semi-rigid container applications.

By selecting appropriate temper and thickness, 3003 aluminum foil can meet diverse engineering requirements while maintaining reliable long-term performance.

IX. Көп берилүүчү суроолор (С&А)

Q1. Why does 3003 aluminum foil have better corrosion resistance than pure aluminum foil?

3003 aluminum foil belongs to the Al–Mn alloy series. The manganese content is controlled at 1.0–1.5%, which forms a more stable alloy microstructure on the surface of the aluminum foil, effectively blocking the intrusion of oxygen and moisture. Compared with 1235 pure aluminum foil, its corrosion resistance is improved by more than 40%. Кошумча, corrosion resistance can be further enhanced through passivation treatment, and salt spray resistance time can reach more than 200 саат, making it suitable for humid and outdoor environments.

---

Q2. How should different tempers of 3003 aluminum foil be selected?

Selection should be based on processing requirements and strength requirements:

1. O temper (annealed):
   Best plasticity, elongation ≥10%, suitable for deep drawing and forming products such as aluminum foil containers and complex-shaped containers.
2. H22 / H24 temper (half-hard):
   Balanced strength and plasticity, suitable for bending and bonding applications such as building insulation foil and packaging foil.
3. H18 temper (full hard):
   Highest strength (≥190 MPa), suitable for applications with high strength requirements such as electronic foil and honeycomb core foil.

---

Q3. Does the product support customization, and what is the minimum order quantity?

Full customization is supported, including thickness (0.014–0.5 mm), туурасы (100–1600 mm), мүнөздүү, бетин дарылоо (passivation, oil coating, embossing), and packaging methods.
The minimum order quantity (MOQ) for regular specifications is 3 tons per specification.
For special customized specifications, the MOQ is 5 тонна.
For long-term cooperative customers, the MOQ can be negotiated.

---

Q4. What international certifications and test reports can be provided?

Each batch of products is provided with a material certificate (COA) and factory inspection report. According to customer requirements, FDA (food contact grade), REACH, RoHS, SGS third-party test reports, and ISO 9001 / ISO 22000 system certification documents can be provided to ensure that products meet compliance requirements of target markets and pass customs clearance smoothly.

---

Q5. How is transportation damage handled?

We adopt high-standard export packaging, and the damage rate is controlled within 0.1%.
If damage is found after receipt of the goods, customers need to provide photos of the damage, packing list, and bill of lading within 72 саат. We will immediately verify the situation and provide free replacement of the corresponding quantity of products or negotiate discount compensation. Ошол эле учурда, packaging solutions will be optimized to avoid similar problems in subsequent shipments.

---

Q6. How should 3003 алюминий фольга жана 3004 aluminum foil be selected?

If the budget is limited and moderate strength is required, while corrosion resistance and formability need to be balanced (such as ordinary food containers, building insulation, and electronic foil), 3003 aluminum foil is recommended, offering better cost performance.
If higher strength, impact resistance, and deep drawing performance are required (such as pressure-resistant containers and high-end building curtain walls), 3004 aluminum foil can be selected, but its cost is 15–20% higher than that of 3003. Samples of both alloys can be provided for testing and comparison.

---

Q7. What are the payment terms and delivery cycle?

Payment terms:
Standard orders adopt 30% advance payment (T/T) жана 70% balance payment against the copy of bill of lading. For long-term cooperative customers, letter of credit (L/C) payment can be negotiated.

Delivery cycle:

• Regular specification stock: shipment within 3–7 days
• Customized specifications: shipment within 10–20 days
• Sea freight to European and American ports: approximately 30–40 days
• Sea freight to Southeast Asian ports: approximately 10–15 days
• China–Europe railway transport: approximately 20–25 days

---

If you need 3003 aluminum foil samples, detailed quotations, or customized solutions, биз менен байланышыңыз. Our account managers will provide professional services within 24 саат.

email：[email protected]

whatsapp：+8619924932491