8011 Cheese Triangle Aluminum Foil Packaging: Կառուցվածք, Specs and Supply Guide

An 8011 cheese triangle aluminum foil packaging material is a thin, փափուկ, coated foil built to wrap single-serve triangular processed cheese.

In other words, it is not plain kitchen foil. Փոխարեն, it is a converting product coated on one side with a protective primer and on the other side with a low-temperature heat-seal lacquer that touches the cheese.

This matters because a portion of processed cheese is rich in fat, salt and moisture. Առաջին, the fat can oxidize and pick up off-notes when it meets oxygen or light.

Հաջորդը, the portion must stay sealed from the factory to the lunchbox. Հետեւաբար, the foil has to combine barrier protection, safe food contact and reliable running on high-speed wrapping equipment at the same time.

This guide explains how the triangle is actually constructed, why 8011 soft foil is the standard alloy, and how the coatings, տպագրություն, embossing and sealing work.

It also covers food-contact compliance, typical specifications, applications and ordering. A broader technical view of the same material family is available on our 8011 aluminum foil for dairy packaging page.

Quick specification overview for 8011 cheese triangle foil

Պարամետր Typical arrangement
համաձուլվածք 8011 (Al-fe-si, 8XXX շարք)
Խառնվածք O soft (եփած)
Foil gauge 10-16 միկրոն; common 12-14 միկրոն
Լայնություն About 50-300 mm slit rolls; jumbo rolls on request
Coating structure NC primer / 8011 փայլաթիթեղ / heat-seal lacquer
Heat seal Low melting point, շուրջը 70 deg C
Տպագրություն Rotogravure, 1-8 գույները
Մակերեւույթի ավարտը Smooth or embossed; արծաթ, gold or custom colors
Core inner diameter 76 mm or 152 մմ
Համապատասխանություն FDA, ԵՄ 1935/2004, Գբ 4806, Iso 9001, Halal option

 

1. What Is 8011 Cheese Triangle Aluminum Foil Packaging?

To begin with, the product is a flexible packaging material made from alloy 8011 in the soft O temper.

After rolling, the foil is coated, printed if required, slit to a narrow width and supplied in rolls. The packaging converter then feeds those rolls into a cheese wrapping line.

Էապես, the foil performs three jobs at once. Առաջին, it forms a barrier against oxygen, խոնավություն և լույս. Երկրորդ, its inner lacquer heat-seals the portion closed.

Third, the printed outer surface carries the brand identity that consumers see on the shelf.

Triangular processed cheese portions individually wrapped in coated 8011 փայլաթիթեղ.
Triangular processed cheese portions individually wrapped in coated 8011 փայլաթիթեղ.

How the Shell-and-Lid Triangle Works

In many portion lines, the triangle uses a two-foil process called shell and lid. Առաջին, a shell foil is formed into a shallow triangular pocket that receives the hot molten cheese.

Then a lid foil is laid over the top and heat-sealed to the rim. Որպես արդյունք, the two coated layers join into one hermetic pack.

By contrast, a single-sheet process uses one foil blank that folds around the portion and seals onto itself. Գործնականում, the choice depends on the filling equipment and the desired opening experience.

Shell and lid gives a rigid, easy-to-open portion, while the single sheet is simpler and uses less material.

Սեղան 1. Shell-and-lid versus single-sheet construction

Առանձնահատկություն Shell and lid (two foils) Single sheet (one foil)
Number of foil webs Երկու: formed shell plus sealing lid One blank folded around cheese
Portion rigidity Ավելի բարձր, defined triangular shape Softer, more flexible
Opening action Lid peeled from the shell Foil unwrapped or torn
Material use Two coated webs One web, generally lower
Typical equipment Form-fill-seal portion line Fold and wrap line

 

2. Ինչու 8011 Soft Foil Is the Standard

համաձուլվածք 8011 belongs to the 8xxx series and is an aluminum-iron-silicon alloy. Գործնականում, the iron and silicon additions give the foil higher strength and better pinhole resistance than a pure aluminum grade at the same gauge.

That combination is why it has become the workhorse for food and lidding foil.

In the soft O temper, the foil is fully annealed. Հետեւաբար, it is ductile and easy to form, fold and emboss without cracking. It also conforms tightly around the cheese, which helps the portion keep a clean shape after sealing.

 Jumbo rolls of soft 8011 aluminum foil before slitting and coating.
Jumbo rolls of soft 8011 aluminum foil before slitting and coating.

Barrier, Pinhole Control and Formability

Aluminum foil is effectively a complete barrier. When it is thick enough to be pinhole-free, it blocks nearly all oxygen, ջրի գոլորշի և լույս.

For a fatty product, that protection is what prevents rancidity, drying and light-struck flavors.

Այնուամենայնիվ, no gauge is free of trade-offs. As the foil gets thinner, the number of pinholes tends to rise, and the web becomes harder to run at high speed. Մյուս կողմից, a thicker foil costs more and uses more material.

Հետեւաբար, the common 12-14 micron range is a balanced point rather than an arbitrary number.

Good mills control pinhole density through clean stock, filtered rolling oil and controlled finishing.

Շատ դեպքերում, the foil is inspected online, and the data is recorded against the production batch so the converter can trace every slit roll.

For buyers, this explains why the choice of material should be treated as part of product development.

A well-controlled 8011 cheese triangle aluminum foil packaging web reduces scrap, protects the flavor and keeps the line moving. Գործնականում, the cheapest foil is not always the lowest-cost option once pinholes and downtime are counted.

3. The Coated Foil Structure

A bare metal foil cannot seal to itself or protect the printed ink. For that reason, cheese foil is converted into a layered structure.

The typical arrangement is an NC primer on the outside, որ 8011 foil in the middle, and a heat-seal lacquer on the food-contact side.

NC Primer and Heat-Seal Lacquer

Առաջին, the NC primer is a nitrocellulose-based coating. It protects the metal, gives the ink a stable surface to bond to and can be supplied clear or tinted, including the familiar gold look.

Ի հավելումն, it prevents the outer surface from scratching during handling.

Հաջորդը, the inner heat-seal lacquer is formulated to melt at a low temperature, շուրջը 70 deg C. When the wrapping line applies heat and pressure, this layer softens and bonds the rim.

As it cools, it forms a tight seal that resists leaking and contamination.

Notably, the two coatings are not interchangeable. The primer is built for print and protection, while the seal lacquer is built for food contact and controlled melting.

Using the wrong layer on the inside would cause weak seals or compliance problems.

A roller coating line applying primer and lacquer to aluminum foil.
A roller coating line applying primer and lacquer to aluminum foil.

Paper and Film Lamination Options

Some wrappers add a paper or film layer. Օրինակ, butter and block cheese often use foil laminated to greaseproof paper, waxed paper or a thin PE layer.

The paper adds stiffness and a matte surface, while PE improves moisture and seal performance.

By contrast, a thin single-serve triangle usually relies on coated foil alone because it needs to flex and peel.

Գործնականում, the converter selects the structure from the product shape, shelf life target and filling equipment rather than from cost alone.

4. Տեխնիկական բնութագրերը

The specification is usually defined around the buyer’s wrapping line. Գործնականում, the critical dimensions are gauge, slit width, roll diameter and core size, because each of these affects how the web runs.

Cheese triangles are narrow products, so the slit width commonly falls between about 50 և 300 մմ.

The mill supplies wider jumbo rolls and then slits them to the exact width. Մինչդեռ, cores are normally 76 mm or 152 mm in inner diameter to match standard unwind shafts.

 Slitting and rewinding narrow foil webs onto packaging cores.
Slitting and rewinding narrow foil webs onto packaging cores.

Սեղան 2. Typical technical specification range

Նյութ Range or option
համաձուլվածք 8011
Խառնվածք O soft; H18/H24 for rigid lidding on request
Foil thickness 10-16 միկրոն (0.010-0.016 մմ)
Slit width 50-300 մմ, custom to drawing
Jumbo roll width Up to around 1600 mm before slitting
Core inner diameter 76 մմ (3 դյույմ) կամ 152 մմ (6 դյույմ)
Հիմնական նյութ Paper, iron or aluminum
Ծածկույթ NC primer plus heat-seal lacquer
Մակերեւույթ Smooth or embossed; արծաթ, gold or custom

 

5. Տպագրություն, Color and Embossing

The outer primer is the surface that carries branding. Շատ դեպքերում, cheese foil is printed by rotogravure, which uses engraved cylinders to transfer ink.

Gravure is chosen because it gives consistent color on long runs and handles the thin, fast-moving web well.

Depending on the design, the press can run from one to eight colors, including gold and silver effects.

After printing, the ink is protected and dried so it does not smear or transfer during winding and sealing.

Gravure Printing and Registered Embossing

Embossing adds a raised or recessed texture using patterned steel rollers. Օրինակ, a fine geometric pattern can hide minor wrinkles and give the portion a premium feel.

Ի հավելումն, embossing improves grip when the consumer peels the lid.

When the texture must line up with a printed logo, the line uses registered embossing. The emboss roller is synchronized with the print repeat so every portion aligns.

By contrast, blind embossing is a standalone pattern with no registration requirement and is simpler to set up.

 Embossing rollers forming a textured pattern on soft foil.
Embossing rollers forming a textured pattern on soft foil.

6. Running on Cheese Packaging Equipment

A foil can meet every dimension on paper and still fail on the line. Հետեւաբար, machine behavior is a core part of the specification rather than an afterthought.

The web must unwind smoothly, hold tension and index in time with the filling and sealing stations.

Heat-Seal Temperature and Machine Compatibility

The inner lacquer is designed to seal at a low temperature, սովորաբար շուրջը 70 deg C. This is useful because processed cheese is filled warm and the portion cannot tolerate high heat.

A narrow, stable sealing window keeps the line fast without burning the coating or the product.

Գործնականում, the seal is controlled by three variables: ջերմաստիճանը, pressure and dwell time. Եթե ​​ջերմաստիճանը շատ ցածր է, the rim leaks. If it is too high, the lacquer can squeeze out or the foil can distort.

Good suppliers provide a recommended seal window and test it on the actual material.

Slitting quality matters as well. A clean edge with no burrs prevents web breaks and jams.

Մինչդեռ, consistent roll hardness and tension avoid telescoping, where the layers slip sideways during unwinding.

 A high-speed form-fill-seal line wrapping and heat-sealing cheese triangles.
A high-speed form-fill-seal line wrapping and heat-sealing cheese triangles.

7. Food Contact Safety and Compliance

Because the inner lacquer touches the cheese directly, the finished material is regulated as a food contact material.

The metal itself is inert, but the coatings and inks must be proven safe under the intended conditions of use.

Migration Testing and Standards

The key safety concept is migration. In other words, regulators check whether substances move from the packaging into the food.

Testing usually covers overall migration, which limits the total amount transferred, and specific migration, which limits individual substances such as certain monomers or additives.

Different markets use different frameworks. For the United States, FDA 21 CFR rules define acceptable coatings and indirect food additives.

For the European Union, Regulation 1935/2004 sets the general requirements, supported by good manufacturing practice rules. In China, the GB 4806 series covers food contact materials and articles.

A compliant supplier supports each shipment with documents. These typically include a mill test certificate, a declaration of compliance and, where required, migration reports from an independent laboratory.

The same documentation discipline applies to regulated pharmaceutical aluminum foil blister packaging material, where the traceability bar is even higher.

Halal certification is also available for brands that need it. Գործնականում, this is often requested for dairy sold in specific markets, and it is arranged against the final coated formulation rather than the bare metal alone.

 

A quality control laboratory checking foil samples and compliance documents.
A quality control laboratory checking foil samples and compliance documents.

Սեղան 3. Common food contact and quality standards

Market / system Reference What it supports
Միացյալ Նահանգներ FDA 21 CFR Indirect food additives and coatings
European Union Regulation 1935/2004 General food contact requirements
Չինաստան Գբ 4806 շարքը Food contact materials and articles
Quality management Iso 9001 Consistent production controls
Ստուգում SGS reports Independent verification and migration
Restricted substances RoHS Control of hazardous substances
Religious compliance Halal Permissibility for target markets

 

8. Four Dairy Packaging Applications

The same 8011 foil family serves more than the classic triangle. Գործնականում, the gauge and coating are adjusted to the product, its fat content and the packaging equipment.

Processed Cheese Triangles

This is the core application. Individually wrapped portions use soft coated foil, often shell and lid, with a low-temperature seal and branded gravure print.

The portion must survive months of shelf life without drying, oxidizing or leaking.

Cheese Slices and Rounds

Sliced and round cheese uses foil or foil-paper wraps that separate the slices and block light. Շատ դեպքերում, the material is slightly stiffer so the sheets feed cleanly and peel apart without tearing.

Butter, Margarine and Spreads

High-fat blocks and portions are sensitive to oxidation and odor pickup. Հետեւաբար, foil laminated to greaseproof paper is common.

The structure locks in aroma, prevents grease staining and gives the block a firm wrap. Similar food-grade rolls are used for our 8011 food grade aluminum foil household range.

Other High-Fat Dairy

Cream portions, soft cheese and certain desserts also use the material. For these products, the main targets are flavor retention, hygiene and easy opening.

The converter tunes the seal layer so the foil peels cleanly without leaving fragments.

9. MOQ, Lead Time and Pricing

On B2B platforms, a common minimum for standard cheese foil is around 300 kilograms per specification.

Այնուամենայնիվ, a direct factory can often arrange smaller trial runs for a new design, followed by larger repeat orders once the packaging is approved.

Lead time depends on whether the order uses a standard coating or a custom print. Plain or standard foil moves quickly, while a new branded artwork requires cylinder preparation, color approval and a first article.

Գործնականում, buyers should plan for the tooling step when launching a new portion.

It is also worth aligning the artwork and technical files early. When the specification, seal window and print design are agreed before the first run, որ 8011 cheese triangle aluminum foil packaging order moves from sample to bulk without repeated corrections.

That planning step is especially valuable for brands launching a new portion.

How Gauge and Customization Affect Cost

The main cost driver is the amount of aluminum, so gauge and tonnage set the base price.

Thinner foil uses less metal but may require tighter processing. Ի հավելումն, custom printing, դաջվածք, special colors and lamination each add converting steps.

Միեւնույն ժամանակ, total cost should include waste and downtime. A foil that runs reliably on the line and seals at the first attempt can be cheaper in practice than a lower-priced roll that causes jams or leak rejects.

The related 8011 H14 PTP blister aluminum foil page shows how the same cost-and-conformance logic applies across temper choices.

10. Why Brands Choose HWALU

Henan Huawei Aluminium Co., ՍՊԸ. is an aluminum foil manufacturer based in the Gongyi aluminum cluster in Henan, Չինաստան.

The company was founded in 2001 and operates integrated rolling, ավարտելու, slitting and coating capacity for packaging foil.

On the production side, the site covers roughly 250,000 square meters with about 1,200 people and an annual capacity of more than 200,000 տոննա.

The foil is exported to more than 70 երկրները, which means the documentation and packaging are already aligned with international buyers.

For cheese and dairy customers, HWALU can supply alloy 8011 in the soft temper with custom gauge, լայնությունը, ծածկույթ, printing and embossing.

Each batch is supported by mill test certificates and traceable batch marks, and the technical team can review drawings or a sample before production.

The practical benefit is repeatable conformity. Rather than renegotiating the specification on every repeat order, the buyer works against one approved standard and can compare incoming rolls directly against earlier shipments.

11. Հաճախակի տրվող հարցեր

Ք: Is the foil supplied in rolls or as cut sheets?

Ա: It is normally supplied in slit rolls that feed the wrapping line. Die-cut sheets can also be arranged for specific fold-and-wrap equipment.

Ք: Which thickness is normal for triangle cheese?

Ա: The common range is 10-16 միկրոն, հետ 12-14 micron widely used. The exact gauge depends on the portion size, the seal design and the running speed of the line.

Ք: Can the foil touch the cheese directly?

Ա: Այո՛. The food-contact side uses a compliant heat-seal lacquer, and the finished material is supported by FDA, EU or GB 4806 documentation and migration testing.

Ք: What is the difference between the primer and the seal lacquer?

Ա: The NC primer is the outer layer for protection and printing. The heat-seal lacquer is the inner layer that melts at about 70 deg C and bonds the portion closed.

Ք: Can you print our brand and add embossing?

Ա: Այո՛. Rotogravure printing supports up to eight colors, and embossing can be supplied as a standalone texture or registered to the printed design.

Ք: What is the usual minimum order and are samples available?

Ա: A typical platform minimum is around 300 kilograms, but smaller trial runs can be arranged. Samples and a first article are produced and approved before bulk production.

12. Եզրակացություն

Ընդհանուր, 8011 cheese triangle aluminum foil packaging is a specialized converting material rather than a commodity foil.

The soft 8011 web supplies the barrier, the NC primer carries the print and protection, and the low-temperature lacquer seals the portion while meeting food contact rules.

Choosing the right specification means balancing gauge, pinhole control, coating structure, տպագրություն, embossing and machine behavior.

Buyers who verify the supplier’s compliance documents, approve a first article and keep traceable batch records remove most of the avoidable risk.

In the end, that disciplined approach is what keeps a single-serve cheese portion fresh, safe and consistent from the first trial to long-term repeat supply.

Ինչու՞ ընտրել մեզ?

Henan Huawei Aluminium Co., ՍՊԸ. Չինաստանում ալյումինի բազմաթիվ արտադրողների և մատակարարների առաջատարն է. Մենք խստորեն վերահսկում ենք որակը և կենտրոնանում ենք հաճախորդների վրա. Մենք հուսով ենք, որ խորը համագործակցություն կունենանք ձեզ հետ և ձեզ կտրամադրենք բարձրորակ ալյումինե նյութական արտադրանք, անհատական ​​OEM ծառայություններ. Եթե ​​ցանկանում եք ստանալ նորագույն և լավագույն գները մեկ կգ-ի կամ մեկ տոննայի համար ստանդարտ քաշի համար, խնդրում ենք կապվել մեզ հետ.

Ալյումինե փայլաթիթեղի արտադրության գիծ

Փաթեթավորում

  • Փաթեթ: Փայտե պատյան
  • Ստանդարտ փայտե պատյանների ճշգրտում: Երկարություն*Լայնություն*Բարձրություն=1.4մ*1.3մ*0.8մ
  • Անհրաժեշտության դեպքում,փայտե պատյանների չափերը կարող են վերանախագծվել ըստ պահանջի.
  • Փայտե պատյանով համախառն քաշի կշեռք: 500-700KG զուտ քաշը: 450-650ԿԳ
  • Դիտողություն: Փաթեթավորման հատուկ պահանջների համար, համապատասխանաբար լրացվում է.