Alumini foll no blister pulu | Protection & Durability

1. Hoʻolauna

ʻO ka aluminum foll no ka blister e hoʻopili nui ana i keʻano e hoʻohana nuiʻia no nā huahana paʻa paʻa, e like me nā pills, maualekuua, a me nā meaʻai.

Hoʻohana pinepineʻia kēia'ōnaehana pākeke i kahi cavity plasted a blister a me nā hōʻailona a me nā hōʻailona ia me kahi mea hoʻihoʻi, ʻO ka hapa pinepine aluminum foil.

Lawelaweʻo alumini foil e like me ke kumu nui ma muli o kāna mau waiwai bruries maikaʻi loa, Hāʻawi i ka mālamaʻana mai ka mistire, māmā, a me nā oxygen-nā mea hiki ke hōʻole i ka maikaʻi o nā huahana pili.

I loko o ka hale o ka hale kūʻai wale nō, blister e hoʻopili ana me nā moʻolelo alumini foil no kahi kokoke 60% o ka pona global hoʻohana no nā lāʻau lapaʻau.

Ke hōʻike nei kēia i ka hana koʻikoʻi a Alminim Fole i nā mea pāʻani i ka mālamaʻana i ka pono a me ka pale o nā huahana lapaʻau, E like me kona hoʻohanaʻana i ka hoʻohanaʻana i nā'āpana'ē aʻe e like me nā meaʻai a me nā mea uila.

2. Nā mea waiwai nui o nā waiwai a Alminim Foil no Blister Publer

Koho nā mea hana i nā follas alumika no ka pohō blister e pili ana i kekahi mau mea nui e pili ana i nā waiwai nui e pili ana i kāna hana.

ʻO kēia mau waiwai e hōʻoia ai i ka foil e hāʻawi i ka pale maikaʻi loa, ka lōʻihi, a me ka hana no nā huahana socraging i nā huahana koʻikoʻi e like me nā lāʻau lapaʻau, meaʻai, a me na uila.

2.1 Nā helu alloy

Hoʻohālikelike ka papaʻaina ma lalo nei i nā meaʻekolu i hoʻohana pinepineʻia e nā allunim maʻamau no ka blister blister-1235, 8011, a me 8079-e nānā ana i kā lākou huiʻana, ʻo Menu ka hoʻomaʻemaʻe, nā mea nui, a me nā noi maʻamau.

• Aluminum 1235 ua hakuʻia 99.35% alumini maʻemaʻe. Ponoʻo ia i konaʻano kiʻekiʻe no nā noi i kahi e hanaʻia ai ka maʻalahi o nāʻano blist.
• Aluminum 8011 Aia i nā pakeneka liʻiliʻi o ka hao, silika, aʻo Manganese e hāʻawi i ka ikaika o ka ikaika a me ke kū'ēʻana. ʻO kēia mau hiʻohiʻona e hana ai i ke koho koho i makemakeʻia no ka phormaceutical propiging.
• Aluminum 8079 e hoʻopaʻa i kahi kaulike ma waena o ka ikaika a me ka formability. Me nā mea paʻakikī kiʻekiʻe ma mua o 1235 a me nā pae hao hao hao, Hāʻawi ia i ka ikaika i hoʻonuiʻia i ka ikaika.

2.2 ʻO nā Metric koʻikoʻi

E pale pono i ka huahana i loko o ka blister, Pono ponoʻo Aluminum Follas i nā mea pohihihi e pono e hui i nā metric overtrics.

ʻO nā mea waiwai nui loa e komo ai:

• mānoanoa: ʻO ka mānoanoa o ka alumini foil maʻamau ma waena o 0.02mm a me 0.25mm. Hāʻawiʻo Thucker Bails i kahi pale hou aku akā e hoʻohui paha i ke kumukūʻai, ʻOiai e hiki ke hoʻohanaʻia nā papa lole o nā'āpana i nā huahana liʻiliʻi.
• Na Waiwai Keakea: ʻO kekahi o nā hiʻohiʻona koʻikoʻi nui loa o Aluminum Foilʻo ia ʻO ka pale kūʻokoʻa Hana. Hiki iā ia ke pani i 95% o ka wai a 98% o ka oxygen, nā meaʻelua i nā mea kōkua nui i ka degradation o nā huahana e like me nā lāʻau lapaʻau. Nui loa, Hiki iā Alumini Foil ke pani Uv kukui, hiki ke hōʻino i kekahi mau huahana, ka hoʻonuiʻana i ke ola o ka pale i nāʻike.
• Mea hoʻonaʻauao ka ikaika: ʻO ka hiki ke loaʻa iā Aluminim Foil e hana i kahi pilina ikaika me nā bliles plastics he mea nui no ka hōʻoiaʻana i ka huahana. Mau pū me ʻO nā lole wela wela Hōʻikeʻia nā mea ikaika ikaika me ka palani, Ke hōʻoiaʻiʻo nei ua paʻa ka hōʻailona, Tamper-maopopo, a hiki i ka hikiʻana mai o ka laweʻana a me ka halihali.

2.3 Hoʻomaʻamaʻa Ili

No ka hoʻonuiʻana i ka hana o nā aluminim foil no blister pulu, Hoʻohuiʻia nā hana likeʻole.

Ua hoʻomaikaʻi kēia mau hana i ka hana o ka foil, helehelena, a me ka hana holoʻokoʻa i ka paleʻana i ka huahana.

• ʻO ka hoʻomaʻamaʻa wela: Pili i kekahiʻaoʻao o ka foil, 'ōlelo ʻO ka hoʻomaʻamaʻa wela Eʻae i ka foil e hoʻopaʻa paʻa me ka blist blister.
• ʻO ka uhiʻana o Lacquer: Ua hoʻopili pinepine nā mea hana i kahi mea hana lacquer i kaʻaoʻao o waho o ka papa'āina a Aluminim e hoʻomaikaʻi i kahi pale o keʻano, pono no ka mālama kālā, lipie, a me nāʻike hoʻoponopono.
• ʻO nā lole a me nā pale pale: I kekahi mau hihia, hou vuntish a i ʻole pio ke pale e pili ana i ka hoʻonui houʻana i nā waiwai o ka foil a hōʻoia i ka pale hope loa no nā huahana koʻikoʻi, e like me nā lāʻau lapaʻau a iʻole nā ​​meaʻai e pono ai i nā ola ma mua.

3. ʻO ke kaʻina hana hana no Alumuinum foil no ka pohō blister

ʻO ke kaʻina hana hana o ka alumini e pili ana i ka pohō blister e pili ana i nā kūlana koʻikoʻi e hiki ai ke hoʻokō i nā kūlana hana e pono ai, me keʻano o kāna mau wahi paʻa, ikaika, a me ka formability.

Aia ma lalo nei he meaʻokoʻa o kēlā me kēia ala i ke kaʻina hana.

3.1 Ke koho koho

ʻO ka hana mua i ka hanaʻana i ka folladium alumini no ka pohō blister ka kohoʻana i nā kumuwaiwai kiʻekiʻe.

ʻO ka mea hana i ka mea maʻamau aluminum ingots, ka mea i kohoʻia e pili ana i ko lākou maʻemaʻe a me keʻano e hōʻoia ai e hōʻoia i ka hana maikaʻi ma Blister Puni.

• Pono pono: No ka paleʻana i ka blister, alumini ingots me kahi maʻemaʻe o 99% a iʻole ke kiʻekiʻe ua kohoʻia. Ka hopena o ka hoʻomaʻemaʻe hoʻomaʻemaʻe i ka formability a me nā waiwai o ka barries o ka foil. ʻOi aku ke kiʻekiʻe kiʻekiʻe kiʻekiʻe, e like me Aluminum 1235 a Aluminum 8079, makemakeʻia no kāna mau mea maikaʻi loa a me nā hiʻohiʻona paʻa.
• Huina: ʻO ka Aluminim Alloy Alloy i kohoʻia ma luna o nā pono kiko'ī o ka pā. ʻo kahi laʻana, Aluminum 8011, i hoʻohui i ka hao a me ka silika, ua hoʻohana pinepineʻia no nā lāʻau lapaʻau ma muli o kona ikaika kiʻekiʻe a me ke kū'ēʻana i ke kuʻekuʻe, while Aluminum 1235 is favored for its flexibility in non-sensitive applications.

The raw materials are carefully selected to ensure that they meet both industry standards and the product-specific requirements of the packaging, such as barrier performance, sealing capabilities, and durability.

3.2 Aluminum Foil Production

Once manufacturers select the raw material, they process the aluminum into thin foil sheets through rolling, annealing, and other methods.

• Rolling: The aluminum ingots are first hot-rolled to a much larger thickness. The sheets are then cold-rolled, where the metal is passed through rollers at room temperature to achieve the desired thickness. This process is essential for creating aluminum foil that is thin yet durable. The foil thickness used in blister packaging typically ranges from 0.02mm to 0.25mm.
• Annalile: After the aluminum sheets are rolled, they undergo an annealing process. ʻO kēia wela wela ka maʻi wela i ka alumini, ka hoʻomaikaʻiʻana i kāna formability a me ka wikiwiki. E hoʻonui pū anaʻo Annealing i ka hiki i ka foil ke Mālama i konaʻano i ka wā e kauʻia ai a hōʻailona paha i ke kaʻina hana blister.
• Hūnā: I ka wā o ke kaʻina hoʻohālikelike, Ua hoʻololiʻia keʻano o ka alumini a Alminim. He mea nui kēia no ka hoʻokōʻana i kaʻili, Ponoʻo Plible Foil i koiʻia no Blister Boutching e mālama ana i ka ikaika pono.

I kēia hana, Ua hanaʻia ka Foil Foil Foil me ka mānoanoa i koiʻia a ua mākaukau no nā hoʻomaʻamaʻa hou a me nā kaʻina hana e hoʻonui ai i kona kūpono.

3.3 Paʻi a me ka huiʻana

Ma hope o ka hoʻopiliʻana o ka alumini a Alminim, ʻO ke ala aʻe e pili ana paʻi ʻana a ka uhi ʻana ka mea e hāʻawi ai i ka pale, Kau kālā, a me ka hana no ka pohō blister.

• Paʻi ʻana: Hiki ke paʻiʻia kaʻaoʻao o waho o ka alumini Kau kālā, ʻIke huahana, a Nā Kūlana Regulatory. He mea nui kēia i ka lāʻau lapaʻau a me nā meaʻai meaʻai, Aia i nā'ōlelo aʻo, KauHua, a koiʻia ka branding. Ka paʻiʻana a i ʻole Ke paʻiʻana i ka paʻiʻana Hoʻohanaʻia nāʻenehana e hoʻopili i ka ink i ka foil, ʻO ka hōʻoiaʻana ua paʻa nā paʻi a me ka pololei.
• Ka uhi ʻana: ʻO ka foil aluminum maʻamau i hoʻopaʻa pinepineʻia me a ʻO ka papaʻaina wela ma loko o ka mea e hōʻoia ai e paʻa pono ana i ka paleʻana i ka blist plastist. Uaʻae kēia couting i ka foil i hana ikaika, earght seal Me ka blister, Ke pale nei i ka mistiture a me ka lewa mai ka hoʻohālikelikeʻana i ka huahana. Kahi mea hou aʻe, Kāne Lacquerlelo Lacqueer i kekahi manawa e hoʻopiliʻia i kaʻaoʻao o waho e hoʻomaikaʻi pale ʻino A e hōʻoia i ka adhesion print.

ʻO ka ka uhi ʻana ʻO ke kaʻina hana pū kekahi i nā hana e hoʻonui ai i ka foil's Nā waiwai Barries, hōʻoiaʻiʻo ia e hāʻawi i kahi kiʻekiʻe o ka paleʻana i nā mea e pili ana i nā kumu kūlohelohe e like me ka mālamalama, mākū, a me ka oxygen.

Hiki ke hoʻolālāʻia nā mea hoʻohana kūikawā e hoʻokō pono ai i nā pono kiko'ī, e like me nā mea e hōʻikeʻia anaʻo Tamper-ʻikeʻia no nā lāʻau lapaʻau.

3.4 Ke hoʻokumuʻana a me ke kaʻina hana

ʻO ka hana hope loa i ka hana o ka hana a Aluminim foll no ka blister e hoʻopili ana i ka hana a moe process. He koʻikoʻi kēia kaʻina hana i ka paleʻana i ka foil a me ka hōʻoia e paʻa ana i ka huahanaʻoiai e mālama ana i ka huahana huahana.

Hana:

Hoʻopili ka mīkini moding i keʻano alumini i loko o kahiʻano blister.

ʻO nā mea hana maʻamau e wela ai a kaomi i ka foil e hana i keʻano o keʻano o ka blist blist.

Hoʻokō lākou i kēia ma o ka thermorform a iʻole keʻano anu, Ke hilinaʻi nei i nā koi huahana.

I ke kaʻina hana thermousforming, Ua wela lākou i ka foil ma mua o ka moding i keʻano, ʻOiai e hoʻohālikelike ana i keʻano o ka foil ma ka mahana o ka lumi me kaʻole me ka hoʻohanaʻana i ka wela.

Moe:

I ka manawaʻo keʻano o ka alluinum foil, Ua hoʻopaʻaʻia ma luna o ka Blister plastik.

ʻO ka maʻamau maʻamau kēia me ka hoʻohanaʻana wela-noho 'Āpana, kahi i hoʻopiliʻia ai ka wela i ka foil a me ka blister e hana i kahi paʻa paʻa.

ʻO ka ʻO ka papaʻaina wela Ma ka alumini foit e hōʻoia i ka sila sila airight a Tamper-maopopo, Ke pale nei i ka huahana mai ka hoʻomaloʻo a mālamaʻana i kona ola pale.
ʻO ka mea hoʻonaʻauao ka ikaika ʻo ia kekahi o nā hiʻohiʻona koʻikoʻi o kēia kaʻina hana.

E hōʻoiaʻiʻo ana i kahi hōʻailona ikaika e noho paʻa ana ka foil i ka blister, Ke paleʻana i kahi leakage a iʻole ka hōʻikeʻana i nā mea piliʻole.

ʻO ka hoʻolālāʻana o ka sila seal e pale aku i ka haʻalele maʻalahi a iʻole ka heleʻana o ka foil, Ke hōʻoia nei i ka palekana palekana a me ka palekana o ka mea kūʻai aku.

4. ʻO nāʻano o keʻano a Aluminim foil i hoʻohanaʻia ma Blister Cocketing

Ua hiki mai ka Alminim Fool no Blister Boutching e hele mai i kekahi mauʻano, ʻO kēlā me kēia hoʻolālā no nā noi kūikawā a me nā koi huahana.

4.1 Unigint vs. Paʻiʻia

Hoʻopili i nā foil i hoʻohanaʻia i ka maʻalahi a me ke kumukūʻai, hoʻohana maʻamau no nā papa hana hana a iʻole nā ​​papa lāʻau bulk pharmaceutinical kahi e kū ai ka branding ma ka paleʻana i ka pale.

Paʻiʻia, Akā naʻe,, lawelawe i nā kumuʻelua: e hōʻoia i kaʻike huahana a hoʻonui i ka hoʻonuiʻana i ka hōʻole.

Nā blirsutical bliry, ʻo kahi laʻana, pinepine nā hiʻohiʻona i paʻiʻia me nā helu batch, nā lā pau, a (pictograms) No ka palekana maʻi, ka hoʻopiliʻana i ka FDA a iʻole nā ​​koi e koi aiʻo EU MDR.

4.2 Aluminum foll me ka papaʻaina wela

ʻO ka hapa nui o nā noi blister e hilinaʻi nui i ka foil pre-coated me kahi polymer wela, e like me keʻano o kaʻaeʻana o ka vinyl (Eva) a iʻole polyolefin.

Ua hōʻoia kēia i nā hōʻailona e hilinaʻi i nā pae kiʻekiʻe ma nā papa papaʻole, me nā hoʻomaka hoʻomakaʻana (Noho) E like me ka haʻahaʻa o 130 ° C no nā huahana koʻikoʻi e like me nā biologics e hikiʻole ke hoʻokaʻawale i ka wela wela.

4.3 Foil me nā pale pepa i hoʻopaʻaʻia a iʻole pvc

E hoʻonui i ka hoʻoikaika hoʻonohonoho, Ua pauʻo Aluminum Foll me ka pepa pepa a iʻole PVC no nā brigid a iʻole nā ​​chicid blirid blirist.

Hoʻohana pinepine pinepineʻia nā meaʻai meaʻai i nā papa hana foil-pepa pepa no nā choculates o premium a iʻole nā ​​copuculas carpulas e hoʻohui i ka pale pepa.

PVC Lamin, ʻOiai he mea maʻamau ma muli o nā hopohopo pili, e loaʻa nā mea pono no ka hoʻopiliʻana i nā uila uila e koi ana i ka dissipation static.

4.4 ʻO hoʻokahi. ʻO ka papa aluminim allusinuum aluminum no ka paleʻana i ka pale

ʻO ka firy-tyeray foil e hālāwai me nā pono loa, ʻOiai e hana ana i nā hana he nui me ka polyhethylene (Pe) a iʻoleʻo nylon e lawelawe i nāʻenehana nui loa.

ʻo kahi laʻana, Pono nā mea i nā'āpana aerospace (nānuixinum-nylon-alumlunim) e pale aku i nā hopena wela (-50° C i 150 ° C) a me ke kaumaha mechanical, ʻO ka hoʻomaikaʻiʻana i nā huahana ola e 30% hoʻohālikelikeʻia i nā koho balota hoʻokahi.

5. Loaʻa iā Aluminum Foll ma Blister Publer

Hāʻawiʻo Aluminum Foil i nā pono nui e hana ana i kahi koho kūpono loa no ka blister e hoʻopili ana i nāʻoihana'ē aʻe.

Huahana palekana

Hāʻawiʻo Alminim Foil ʻO nā waiwai maikaʻi loa, Ke pale nei i nāʻike i ka wai, oxygen, a me ka malamalama.

He mea nui kēia no lāʻau lapaʻau (e.g., nā papa a me nā copules), e hiki ai i ko lākou mau poli i ka wā i hōʻikeʻia ai i kēia mau mea.

Hōʻike nā haʻawina i nā huahana i hoʻopaʻaʻia ma Aluminum Foil hiki i ke olaʻo Shelf a hiki i 3 manawa lōʻihi ma mua o kēlā mau mea i hanaʻia ma nā mea pale palekana.

Nā hiʻohiʻona a me nā hiʻohiʻona palekana

ʻO ka Tamper-maopopo ʻO ka hiʻohiʻona o Aluminum Foit e hōʻoia e hiki ke maʻalahi ke hoʻomaopopo inā i weheʻia kahi pākeke a hoʻololiʻia.

He mea nui kēia no ka mālamaʻana i ka waiwai o ka huahana a e hōʻoia i ka palekana o ka mea kūʻai aku, nui loa i loko o ka hale kūʻai lāʻau a me nā'āpana meaʻai.

Sustaintability

Alumini foil 100% recyclable, Ke hana nei i kahi koho eco-aloha no ka paleʻana.

I ka ʻoiaʻiʻo, luna 75% o nā aluminum a pau i hanaʻia e hoʻohana mau ana i kēia lā ma muli o kāna recyclability.

Mālama ka hana recycling i 95% o ka ikehu pono e hana i ka alumini hou, ʻO ka hāʻawiʻana i kahi hōʻemi i ka hopena o ke kaiāulu.

Uku kūpono

ʻOiaiʻo ia i kāna waiwai nui loa, Ke waiho neiʻo Alminim Foil kumukūʻai-maikaʻi, nui loa ma ka hana kiʻekiʻe.

ʻO kona mau hana a me ka recyclability e hana ia i kahi koho waiwai hou aʻe i hoʻohālikelikeʻia i nā mea'ē aʻe i nā mea'ē aʻe.

ʻO ka hana maʻamau no nā noi likeʻole

Ka hana maʻamau o ka alumini foil i ka mānoanoa, mālamaʻona, a me ka paʻiʻana i mea nui loa no ka pono o nā pono o ka diverse

Inā no nā lāʻau lapaʻau, ʻeke meaʻai, a iʻole nā ​​mea uila, Hiki i nā mea hana ke hana i nā mea hana alumulat alumanim e kūpono i nā koi kūpono.

6. Nā noi

Loaʻaʻo Alminimum i ka pale blister e loaʻa i nā hana ākea ma waena o nāʻoihana ma muli o kāna mau waiwai kiʻekiʻe, ka lōʻihi, a me ka uila.

Malalo, Eʻimi mākou iʻekolu mau'āpana mua ma kahi e pāʻani aiʻo Alumini Foil i kahi hana koʻikoʻi.

6.1 Pharmaceutitical Blister Publer

I kaʻoihana lāʻau lapaʻau, blister blisting no nā waihona kālā no ka kokoke 60% o nā mea hana lāʻau lapaʻau a pau, a me ka follainum foil e hana i nā mea lidding ma kahi kokoke 70% o kēia mau noi.

Eia hou, hiki i ka aluminum ke poloka a hiki i 95% o ka wai a 98% o ka oxygen E hōʻoia i nā mea kanu lāʻau lapaʻau pono (Apis) noho paʻa a kūpono hoʻi i ko lākou olaʻana o ko lākou ola.

NOEHUI, nā papa a me nā capsules-ʻoi aku ka paʻakikī i ka haʻahaʻa, māmā, a iʻole ka maikaʻi o ka oxygen-pōmaikaʻi mai nā bliles foil-backed e mālama i ka pale no ka ʻElua mau makahiki ma lalo o nā kūlana mālama maʻamau.

6.2 Nā meaʻai a me nā mea inu

I ka meaʻai a me nā mea inu, Hoʻopauʻo Alumini Follar Blister e lawelawe i nā mea e mālama ai ma keʻano he hopena kūpono no ka hoʻonuiʻana i ke olaʻo ka pale.

ʻo kahi laʻana, ʻO nā Vitamin a me nā mea hana pinepine pinepine pinepine i nā mea kanu Gummy Cummy Vitamins a me nā papa effentlent, kahi e hōʻemi ai ka foil barrier 80-90% ua hoʻohālikelikeʻia i nā pale pale-wale nō.

NOEHUI, E noho mau nā huahana no ka 18 mahina, ka hōʻemiʻana i ka spilage a me ka pauʻole.

6.3 Nā electronics a me kaʻoihana

I nā leka uila a me nā noi hana, Ua paleʻo Aluminim Follar Blister e pale i nā mea iʻikeʻia i nā'āpana nui mai ka wai, lepo, a me ka laweʻana i ka electrostatic (Esd).

ʻo kahi laʻana, nā microchips liʻiliʻi, KUPONOPONOPONOPONO, a ua koi pinepine nā meaʻike pololei e koi i nā helu o ka lawena (MVR) Ma lalo 0.01 G / M² / lā.

Tuhu- a me nā papa aluminum aluminim foil i loaʻa i nā waiwai mvtr e like me ka haʻahaʻa 0.005 G / M² / lā, Ke hōʻoia nei i nā mea koʻikoʻi e hoʻomau i ka hana holoʻokoʻa i ka wā o ka hoʻounaʻana a me ka mālamaʻana.

Nui loa, Hāʻawiʻo Alminim Foil ʻekolu mau kiʻekiʻe ma mua o hoʻokahi mau plastics hoʻokahi-no laila e hōʻemi ana i nā pōʻino huahana i nā wahi kiʻekiʻe, e like me nā laina o AutoMotOTive a iʻole Aerospace.

Kahi mea hou aʻe, Ua hoʻonohonohoʻia nā hoʻonohonohoʻana i nā hana alumini me PVC a iʻole holoholona e hāʻawi i ke kū'ē, pale aku i nā'āpana'āina i nā mea a nā mea hana i hoʻohanaʻia ma nā kaʻina hana hana.

NOEHUI, ʻO nā mea uila a me nā mea hana hana pilikino e hilinaʻi nei ma keʻano o ka alumini follar blister e hōʻemi i nā hemahema, ʻO nā uku hōʻoia haʻahaʻa haʻahaʻa, A e hōʻoia e loaʻa nā mea hoʻohana i nā huahana piha piha.

7. ʻO nā pilikia nui i ka hoʻohanaʻana i ka foil alumini

ʻOiaiʻo Aluminim Foil e hāʻawi i nā mea pono nui, Aia kekahi mau pilikia i kona hoʻohanaʻana, komo:

• ʻO nā waiwai waiwai: Hiki i nā kumukūʻai Aluminum ke hoʻopili ma muli o nā globalika o ka honua, hiki ke hiki i nā kumukūʻai o ka pona.
• Hopena kaiaulu: ʻOiaiʻo kāna recyclability, ka ikaika-ikaika Pūhala Hana No ka hoʻonāukiukiʻana i nā hopohopo e pili ana i kona mau wāwae wāwae.
• Hoʻoponopono i ka hoʻoponoponoʻana: Nā mea hana, nui ma kaʻoihana lāʻau lapaʻau, pono e hoʻokō pono FDA a EUMULANES, Ke hōʻoia nei ua palekana ka foil i hoʻohanaʻia a kūpono no ka hoʻopiliʻana me nā mea kūʻai aku.

8. ʻO nā mea hoʻonāukiuki i loko o ka alumini foil no ka pohō blister

Ke hele mau nei kaʻoihana hana, me nā mea hoʻoweliweli i loko o kaʻenehana alumini folina ma muli o ka hoʻomaikaʻiʻana sustaintability, Hana, a mea kūʻai aku.

Aia kekahi mau manawa hou:

• Nanotech me nā lole pili i piliʻia e hoʻonui ana i nā waiwai o ka foil a hana hou i nā mea e pili ana i nā mea kūlohelohe.
• Ka hoʻohuiʻana o smart pabing Nā hiʻohiʻona, e like me Nā hōʻailona rfid a nā poʻe hoʻopaʻapaʻa, eʻae i nā mea kūʻai aku a me nā mea hana e nānā i nā kūlana huahana.

9. FaqS

Q: Hiki ke ho'ohana hou 'ia ka pepa alumini?

Hiki iāʻoe ke hoʻoponopono hou i ka alumini aluminim 100% a heluhelu hou i nā manawa he nui, ʻO ka mea e hōʻemi nui i kona hopena kaiāulu.

Q: No ke aha keʻano o ka alumini foil kūpono no ka phormaceutity propiging?

Hāʻawiʻo Aluminum Folla i ka pale o ka pale kiʻekiʻe, oxygen, a me uv kukui, he mea nui no ka mālamaʻana i ka hopena a me ke ola o nā lāʻau lapaʻau.

Q: Hiki ke hoʻohanaʻiaʻo Aluminum Follar Blister i hoʻohanaʻia no nā huahana brozen?

ʻAe, Mālamaʻo Aluminum Foil i kāna mau waiwai Barries ma nā wela wela, e kūpono ana i nā meaʻai frozen a me nā biologics i mālamaʻia ma -20 ° C a i lalo.

Q: Pehea e hoʻohālikelike aiʻo Aluminim Foil i ka plastik i nā huapalapala ma nā'ōlelo o ka recyclability?

ʻO ka hoʻopauʻana a Alminimum i kahi kiʻekiʻe o ka honua hou (75%) a hiki i ka recyclite recycnite, ʻOiai e hoʻolōʻihiʻia ka recycling plastic (a puni 15%) Ma muli o nā mea hana waiwai.

Q: Aia nā mea'ē aʻe i nā alluinum foil no ka pohō blister?

ʻOiaiʻo nā kiʻiʻoniʻoni a me nā mea hana pepa e pili ana i nā mea koho, nele lākou i nā mea kiʻekiʻe a me nā mea waiwai o ka alumini, Ke hana nei i ke koho koho i kohoʻia no nā huahana kiʻekiʻe a iʻole nā ​​huahana koʻikoʻi.

10. Hopena

Ke waiho mau neiʻo Alminim Fol i kahi mea waiwai i loko o kaʻoihana bliler blister ma muli o kona mau hiʻohiʻona pale maikaʻi loa, kūmole, a me ke kūpaʻa.

Inā hoʻohanaʻia no nā lāʻau lapaʻau, meaʻai, a iʻole nā ​​mea uila, ʻO Aluminim foil i nā huahana palekana palekana palekana a pale aku iā lākou mai nā kumu kūlohelohe.

Me nā mea hoʻonāukiuki, Ke hoʻomau neiʻo Aluminum Foil e hana e hoʻokō i nā koi nui o kaʻoihana, e hana ana i kahi mea kūpono no nā hopena o nā mea hoʻoponopono hou.