অন্তরণ জন্য অ্যালুমিনিয়াম ফয়েল কি?

নিরোধকের জন্য অ্যালুমিনিয়াম ফয়েল হল এক ধরনের অ্যালুমিনিয়াম ফয়েল যা তাপের ক্ষতি বা লাভ কমাতে সাহায্য করার জন্য বিভিন্ন ধরনের নিরোধক ব্যবহার করা হয়. এটি কম তাপ নির্গমন এবং উচ্চ প্রতিফলনের কারণে তাপ নিরোধক জন্য একটি অত্যন্ত কার্যকর উপাদান.

নিরোধক জন্য অ্যালুমিনিয়াম ফয়েল সাধারণত দেয়াল অন্তরক জন্য নির্মাণ শিল্পে ব্যবহৃত হয়, ছাদ, এবং ভবনের মেঝে. It is also used in the automotive and aerospace industries to insulate vehicles and aircrafts. এছাড়াও, it is used for insulation in appliances, such as refrigerators and ovens.

The insulation properties of aluminum foil are due to its ability to reflect radiant heat. Radiant heat is the transfer of heat through electromagnetic waves, and aluminum foil is highly effective at reflecting these waves. This helps to reduce the amount of heat that is transferred through the material and into or out of the insulated space.

Aluminum foil for insulation is typically available in rolls or sheets of varying thicknesses, depending on the specific application and requirements. It can be used alone or in combination with other materials, such as foam or fiberglass, to provide additional insulation.

Aluminum foil for insulation parameters

  • খাদ: 1100, 1145, 8011 ইত্যাদি
  • মেজাজ: ও ( অ্যালুমিনিয়াম ফয়েল প্রলিপ্ত কাগজ সম্পর্কিত ), H22 etc
  • পুরুত্ব: 15 মাইক্রন ( 0.015মিমি ), 40 মাইক্রন ( 0.04মিমি ) ইত্যাদি
  • প্রস্থ: 200মিমি, 1400মিমি ইত্যাদি

What is the disadvantage of aluminum foil insulation?

Aluminum foil can be used as an insulating material in certain applications, especially as a radiation barrier, and aluminum foil insulation has many advantages. একই সময়ে, there are also many obvious shortcomings.

Limited R-value: Aluminum foil acts primarily as a radiant barrier, reflecting heat and light. It does not provide significant resistance to heat flow by conduction or convection. This means it may have a lower R-value (a measure of insulation) compared to materials like fiberglass or foam board insulation. For effective insulation, additional insulation may be required next to the foil.

Easy to tear and puncture: Aluminum foil is relatively thin and can easily tear or puncture.

Cost: Aluminum foil can be more expensive as an insulation material than other traditional insulation materials, adding up in cost.

Environmental concerns: The production of aluminum foil involves the mining of bauxite, which has a negative impact on the environment.

Limited effectiveness in extreme temperatures: Foil insulation may not perform well in extreme heat or cold.

Installation Complexity: Properly installing foil insulation can be more complicated than installing other insulation materials.

কেন আমাদের নির্বাচন করেছে?

হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড. চীনে অনেক অ্যালুমিনিয়াম উত্পাদন এবং সরবরাহকারীদের নেতা. আমরা কঠোরভাবে মান নিয়ন্ত্রণ এবং গ্রাহকদের উপর ফোকাস. আমরা আপনার সাথে গভীর সহযোগিতা আশা করি এবং আপনাকে উচ্চ মানের অ্যালুমিনিয়াম উপাদান পণ্য কাস্টম OEM পরিষেবা সরবরাহ করব. আপনি যদি প্রতি কেজি বা প্রতি টন স্ট্যান্ডার্ড ওজন অনুসারে নতুন এবং সেরা দাম পেতে চান, আমাদের সাথে যোগাযোগ করুন.

অ্যালুমিনিয়াম ফয়েল উত্পাদন লাইন

মোড়ক

  • প্যাকেজ: কাঠের ক্ষেত্রে
  • স্ট্যান্ডার্ড কাঠের কেস স্পেসিফিকেশন: দৈর্ঘ্য*প্রস্থ*উচ্চতা=1.4মি*1.3মি*0.8মি
  • একবার প্রয়োজন,কাঠের কেস মাত্রা প্রয়োজন হিসাবে পুনরায় ডিজাইন করা যেতে পারে.
  • কাঠের কেস প্রতি মোট ওজন স্কেল: 500-700কেজি নেট ওজন: 450-650কেজি
  • মন্তব্য: বিশেষ প্যাকেজিং প্রয়োজনীয়তা জন্য, সংশ্লিষ্ট অনুযায়ী যোগ করা হবে.