1070 ورق ألومنيوم

1070 مقدمة رقائق الألومنيوم

1070 رقائق الألومنيوم لديها مرونة عالية, المقاومة للتآكل, الموصلية الكهربائية والحرارية الجيدة, وهو مناسب للاستخدام في الحشيات والمكثفات المصنوعة من رقائق الألومنيوم. قدمت شركة Huawei Aluminium مطحنة Zhuoshen لدرفلة الرقائق لضمان الشكل الجيد للوحة. Warwick Aluminum’s 1070 يتم استخدام رقائق الألومنيوم في الرقائق الإلكترونية, مع حصة سوقية تزيد عن 80%. The product has stable performance and excellent quality.

1070 aluminum foil chemical composition

هواوي 1070 aluminum foil specifications

الخواص الميكانيكية 1070 ورق ألومنيوم

خصائص 1070 ورق ألومنيوم

• 1. التوصيل. The conductivity of 1070 رقائق الألومنيوم تصل إلى 62{20درجه مئوية(68℉)(%IACS)}, which gives it a strong conductive advantage over other alloy aluminum foils. The thermal conductivity and electrical conductivity of 1070 aluminum alloy foil are second only to copper, silver and gold.
• 2. مقاومة جيدة للتآكل. بصورة مماثلة, the surface of 1070 aluminum foil without special treatment will naturally produce a dense Al2O3 protective layer, which has good corrosion resistance to the atmosphere (including industrial atmosphere and marine atmosphere), ماء, most acids and organic matter.
• 3. وزن خفيف. Under the same volume, the weight of 1070 aluminum foil is only about 35% of Cu and Fe.
• 4. Other features. فضلاً عن ذلك, 1070 aluminum foil also has good ductility and formability. Below 0°C, the lower the temperature, the higher the strength and plasticity.

هواوي 1070 aluminum foil production standards

Applications of 1070 ورق ألومنيوم

1070 aluminum foil for electrolytic capacitors

1070 aluminum foil has a high electrical conductivity of up to 65.0% IACS, as well as excellent thermal conductivity and corrosion resistance, which can well meet the performance requirements of aluminum foil for electrolytic capacitors. It is worth mentioning that Huawei 1070 aluminum foil for electrolysis has stable performance and guaranteed quality. It is used in electronic foils such as capacitors, with a market share of more than 80%.

1070 aluminum foil for transformer

The use of 1070 O aluminium foils strips for transformers winding is the most important material in transformer manufacturing.

The quality of aluminum foil directly affects the performance of transformers.

So in the production process, we should pay attention to some details. Here are some benefits of 1070 O aluminium foils strips for transformers winding:

• 1.سطح 1070 O aluminium foils strips for transformers winding is extremely smooth, and there will be no burr or scratches on it. This greatly reduces the chances of short circuit between windings.
• 2.ال 1070 O aluminium foils strips for transformers winding can be cut arbitrarily during processing without generating sparks, so that it will not affect the safety of operation.
• 3.1070 O aluminium foils strips for transformers winding is soft, which can reduce the stress caused by bending deformation and improve its mechanical strength to prevent cracking or breaking of the coil during bending and installation.
• 4.ال 1070 O aluminium foils strips for transformers winding has good electrical conductivity, low resistivity, which can reduce energy loss and enhance power efficiency in the process of power transmission and distribution.
• 5.انعكاس عالية: According to statistics, أكثر من 97% of aluminum foil reflects infrared light.

1070 cosmetic cover aluminum foil

Cosmetic bottle caps commonly use 0.17mm to 0.5mm thick 1070 ورق ألومنيوم. The strength, elongation and dimensional deviation of the 1070 aluminum foil used in Huawei cosmetic bottle caps are strictly and effectively controlled. The produced 1070 aluminum foil is flat and has no curl marks, scratches or stains, ensuring bottle cap shaping, post-adhesive and other processing Require. – Printing is satisfied.

1070 lithium battery positive electrode aluminum foil

سبيكة:1070

حالة: ح18 (hard state)

سطح: bright on both sides.

Aluminum content: ≥99.70%.

سماكة رقائق الألومنيوم: 0.012مم, 0.013مم, 0.015مم, 0.020مم, 0.030مم.

Aluminum foil width: The width can be customized according to customer requirements.

قوة الشد: ≥160N/mm.

Brush level: ≥31 dyne.

هواوي المنيوم 1070 aluminum foil quality control

• 1. Strictly control the width and thickness of the finished product, and ensure that the thickness fluctuation is within 4%;
• 2. Ensure the quality of the slices, the end faces are cut neatly, and there are no burrs, tower shapes, إلخ.;
• 3. Ensure that the tape at the joint does not stick to one layer;
• 4. The layout is smooth and clean, without ridges, oil spots, black oil spots, خطوط مشرقة, roller marks, uneven spots and other defects.