PTP aluminum blister foil

PTP aluminum Blister foil parameter Alloy 1235, 8011, 8021 etc Temper  O( HO ), H18, etc Width 300mm, 600mm, etc Thickness OP: 0.5 - 1.5 g/m2 Aluminum foil: 20 micron ( 0.02mm ), 25 micron ( 0.025mm ), 30 micron ( 0.3mm ) etc HSL ( VC ):3 - 4.5 gsm Primer: 1gsm Surface treatment Laminated, printing, Single bright side, etc what is PTP aluminum blister ...

Custom printing aluminum foil jumbo roll

The printing process and precautions of aluminum foil for medicine packs The process flow of packaging aluminum foil is: aluminum foil unwinding -> gravure printing -> drying -> protective layer coating -> drying -> adhesive layer coating -> drying -> aluminum foil winding. In order to achieve the above-mentioned performance requirements in the PTP aluminum foil printing and coating produc ...

1235 aluminum foil

1235 alloy aluminum foil

Mechnical Properties Dinomination Gauge/Thickness (mm) Alloy Temper Tensile Strenght (MPa) Elogation (%) Food Container Foil 0.041 – 0.089 1235-O 45 – 100 >4 0.09 – 0.139 50 – 100 >6 0.14 – 0.20 50 – 100 >10 Application Food container etc

kitchen foil

Aluminum foil for kitchen

Parameters Surface Teatment: One side bright, another side dull. Printing: coloured gold, rose gold Embossed: 3d pattern Thickness: 20mts, 10 mic, 15 micron etc Sizes: 1m, 40*600cm, 40x100 cm etc Application: Kitchen aluminum foil can be used in microwave ovens! In fact, foods heat more thoroughly in aluminum than in plastic and retain more of their original texture and flavor. Aluminum foil ...

aluminum foil for baking pans

Custom aluminum foil for various applications

Application PS base: After surface treatment, cut into pieces for photosensitive printing. Air conditioner aluminum foil: After punching and slicing, the copper pipes are connected in series and used for the radiator in the air conditioner. Can lid foil: Used for the production material of can body and lid Beer label: After being printed on the surface, it is used at the beer cap. Medicinal foi ...

Part of the cause of aluminum foil splitting and cutting edges, polygons, and powder falling

The post-processing of aluminum foil is an important part of an enterprise, which is related to the yield of an aluminum enterprise and the profit point of the enterprise. The higher the yield, the higher the profit point of the enterprise. Of course, the yield rate must be controlled in every link, standardized operation, and sophisticated equipment and responsible leaders and employees are required. I don't und ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...

Aluminum foil production process - ingot hot rolling method, twin roll casting method

hot ingot rolling First, the aluminum melt is cast into a slab, and after homogenization, hot rolling, cold rolling, intermediate annealing and other processes, it is continued to be cold rolled into a sheet with a thickness of about 0.4~1.0 mm as a foil blank (casting → hot rolling billet → cold rolling → foil rolling). In the ingot hot rolling method, the hot rolled billet is first milled to remove defect ...

The application potential of aluminum foil in lithium batteries is huge

The development of new energy vehicles is an important part of the low-carbon economy, and plays an important role in alleviating the contradiction between energy supply and demand, improving the environment, and promoting sustainable economic development. New energy vehicles are one of the industries that best reflect a country's technological development level, independent innovation capabilities and internatio ...

What is the difference between aluminum foil lunch boxes and traditional disposable lunch boxes?

Aluminum foil lunch boxes made of aluminum foil can be processed into various shapes and are widely used in food packaging such as pastry baking, airline catering, takeaway, cooked food, instant noodles, instant lunch and other food fields. The aluminum foil lunch box has a clean appearance and good thermal conductivity. It can be heated directly on the original packaging with ovens, microwave ovens, steamers and ...

Ways to prevent aluminum foil from degreasing

Degreasing pollution is mainly manifested on the surface of the aluminum foil in 0 state. After the aluminum foil is annealed, it is tested by the water brushing method, and it does not reach the level specified in the water brushing test. The aluminum foil that requires the water-washing test is mainly used for printing, composite with other materials, etc. Therefore, the surface of the aluminum foil must be ...