single zero large roll aluminum foil

Single zero aluminum foil

Single zero aluminum foil refers to aluminum foil with a thickness between 0.01mm ( 10 micron ) and 0.1mm ( 100 micron ). 0.01mm ( 10 micron ), 0.011mm ( 11 micron ), 0.012mm ( 12 micron ), 0.13mm ( 13 micron ), 0.14mm ( 14 micron ), 0.15mm ( 15 micron ), 0.16mm ( 16 micron ), 0.17mm ( 17 micron ), 0.18mm ( 18 micron ), 0.19mm ( 19 micron ) 0.02mm ( 20 micron ), 0.021mm ( 21 micron ), 0.022mm ( 22 mic ...

aluminum foil for decoration

Aluminum foil for decoration

The decoration foil is a decoration material used through aluminum-plastic composite method, which uses the characteristics of good coloring and high light and heat reflectance of aluminum foil. It is mainly used for construction, furniture decoration and part of gift box packaging. The decoration foil has the advantages of heat insulation, moisture resistance, sound insulation, fire prevention and eas ...

foil thickness aluminum

Custom thickness aluminum foil jumbo roll

Aluminum foil thickness for different purposes Alloy Alloy state Typical thickness(mm) Processing methods End use smoke foil 1235-O、8079-O 0.006~0.007 Composite paper, coloring, printing, etc. Used in cigarette packaging after lining, printing or painting. Flexible packaging foil 8079-O、1235-O 0.006~0.009 Composite paper, plastic film embossing, coloring, printi ...

aluminum foil for baking pans

Custom aluminum foil for various applications

Application PS base: After surface treatment, cut into pieces for photosensitive printing. Air conditioner aluminum foil: After punching and slicing, the copper pipes are connected in series and used for the radiator in the air conditioner. Can lid foil: Used for the production material of can body and lid Beer label: After being printed on the surface, it is used at the beer cap. Medicinal foi ...

What is the role of aluminum foil stack rolling (double rolling)?

Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...

Selection principle of aluminum foil pass processing rate

The selection principle of pass processing rate is as follows: (1) Under the premise that the equipment capacity allows the rolling oil to have good lubrication and cooling performance, and can obtain good surface quality and shape quality, the plasticity of the rolled metal should be fully utilized, and the large pass processing rate should be used as much as possible to improve the rolling mill Production ef ...

When grilling food with aluminum foil, should the shiny side face up or the matte side up?

Since aluminum foil has shiny and matte sides, most of the resources found on search engines say this: When cooking food wrapped or covered with aluminum foil, the shiny side should face down, facing the food, and the dumb side Glossy side up. This is because the glossy surface is more reflective, so it reflects more radiant heat than matte, making the food easier to cook. Is it really? Let's analyze the heat ...

Aluminum foil packaging, you do not know the performance characteristics and uses

Food packaging: Aluminum foil packaging can also be used for food packaging because it is highly malleable: it can easily be converted into flakes and folded, rolled up or wrapped. Aluminum foil completely blocks light and oxygen (resulting in fat oxidation or decay), smell and aroma, moisture and bacteria, and can therefore be widely used in food and pharmaceutical packaging, including long-life packaging (asep ...

The aluminum foil rolling mill back-up roll bearing and inner ring are successfully developed

In recent years, Huawei Aluminum Co., Ltd. has set up a special research team under the condition that the aluminum foil rolling mill backing roll and the inner ring of the backing roll bearing are tight, to maintain production by repairing the scrapped backing rolls, and to ensure the normal operation of the seven aluminum foil rolling mills. During the repair process, the research team was able to repair, explo ...

Professional knowledge of tension system of aluminum foil slitting machine

After printing and coating, aluminum foil paper and cash register paper need to be post-printed and slit on a slitting machine to cut large rolls of semi-finished products into the required specifications. The semi-finished products that run on the slitting machine are an unwinding and rewinding. This process includes two parts: machine speed control and tension control. The so-called tension is to pull the al ...