thin aluminum foil

Thin aluminum foil

Ultra-thin aluminum foil short process production process which is characterized by: Step 1: smelting: the use of a large-capacity regenerative melting furnace to convert the raw aluminum into liquid aluminum, after cleaning into the foundry. In the process of liquid aluminum flow, Al-Ti-B is added online to form a continuous and uniform thinning effect. The graphite rotor can be degassed and slag removed onlin ...

aluminum foil roll for container

Aluminum foil for food container

Parameters Double bright side Alloy: 3003, 8011 etc Temper: O ( HO ), H22, H24 etc Thickness: 20 micron, 200 micron etc Width: 100mm, 600mm etc Application Aluminum foil for tray Aluminum foil for bowl Aluminum foil for cup Aluminum foil for pan Aluminum foil for foil plate Aluminum foil for pot About us Henan Huawei Aluminum Co., Ltd. is the leader of many alumin ...

aluminum foil for transformers

Aluminum foil for transformer

Aluminium foil general parameters for transformers Alloy 1050/1060/1070/1350 Aluminium foil for transformer Temper 0 Thickness 0.2--4mm Width 20-1650mm Thickness deviation 76 The width of the deviation 500 Thickness tolerance ≦5 Brightness L ≦60 wettability Class A (Brush test) Tensile strength(Mpa) At customer's request Elongation δ% (Scaling i ...

8021 aluminum foil

8021 alloy aluminum foil

As one of the 8 series aluminum foils, 8021 aluminum foil is a series of alloy products commonly used in food packaging aluminum foil, and its good alloy properties are inseparable. The surface of 8021 aluminum foil is extremely clean and hygienic. No bacteria or microorganisms can grow on the surface. It is a non-toxic packaging material that can be in direct contact with food without any hazard to human hea ...

1145 aluminum foil

1145 alloy aluminum foil

1145 aluminum foil general parameters Alloy 1145 aluminum foil Temper O, H18, H19 Product Style coil, roll Thickness 0.01-0.2mm,0.0005 to 0.064 inches Width 100-1600mm,0.375 to 60 inches Length(mm) customization Thickness tolerance +/- 2% Performance One is high plasticity and corrosion resistance, and the other is electrical and thermal conductivity, which can ...

How is aluminum foil produced?

Cast-rolled aluminum foil production process Aluminum liquid, aluminum ingot -> Smelt -> Continuous roll casting -> Winding -> Cast roll finished product Plain foil production process Plain foil -> Cast-rolled coil -> Cold rolled -> Foil rolling -> Slitting -> Annealing -> Plain foil finished product The manufacture of aluminum foil is similar to making pasta at home. A large b ...

Fire prevention measures during aluminum foil rolling

Fire or explosion in aluminum foil rolling must meet three conditions: combustible materials, such as rolling oil, cotton yarn, hose, etc.; combustible materials, that is, oxygen in the air; fire source and high temperature, such as friction, electric sparks, static electricity, open flames, etc. . Without one of these conditions, it will not burn and explode. The oil vapor and oxygen in the air generated duri ...

Ways to prevent aluminum foil from degreasing

Degreasing pollution is mainly manifested on the surface of the aluminum foil in 0 state. After the aluminum foil is annealed, it is tested by the water brushing method, and it does not reach the level specified in the water brushing test. The aluminum foil that requires the water-washing test is mainly used for printing, composite with other materials, etc. Therefore, the surface of the aluminum foil must be ...

Aluminum foil rolling process and characteristics

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...

What's the difference between 8011 and 1235 aluminum foil?

Common aluminum foil materials are 8011 aluminum foil and 1235 aluminum foil. The alloys are different. What's the difference? Aluminum foil 1235 aluminum foil is different from 8011 aluminum foil alloy. The process difference lies in the annealing temperature. The annealing temperature of 1235 aluminum foil is lower than that of 8011 aluminum foil, but the annealing time is basically the same. 8011 aluminum foi ...