aluminum foil jumbo roll

Aluminum foil jumbo roll

A type of hot stamping material that is directly rolled into a thin sheet using metal aluminum. The hot stamping effect is similar to that of pure silver foil, so it is also called fake silver foil. Because aluminum has a soft texture, good ductility, and silvery white luster, if the rolled sheet is mounted on an offset paper with a material such as sodium silicate to make an aluminum foil, it can also be pri ...

foil thickness aluminum

Custom thickness aluminum foil jumbo roll

The thickness of aluminum foil coil is usually less than 0.2mm. Different thicknesses have different uses. We can customize different thicknesses according to your requirements. Aluminum foil can be divided into industrial aluminum foil and packaging aluminum foil. Industrial aluminum foil has a relatively pure chemical composition, with a thickness of 0.005 to 0.2 mm. It is mainly used as capacitors, ther ...

electrode material aluminum foil

Aluminum foil for electric

Application Aluminum foil for capacitor Aluminum foil for battery Aluminum foil for cable Electrically conductive aluminum foil tape

aluminum foil for pharmaceutical

Aluminum foil for pharmaceutical

Alloy: 1145, 8011 etc Thickness: 0.0065mm - 0.05mm Width: 250mm - 1050mm Product type PTP aluminum blister foil Cold form alu alu foil Easy tear aluminum strip foil About us Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide yo ...

1235 aluminum foil

1235 alloy aluminum foil

Mechnical Properties Dinomination Gauge/Thickness (mm) Alloy Temper Tensile Strenght (MPa) Elogation (%) Food Container Foil 0.041 – 0.089 1235-O 45 – 100 >4 0.09 – 0.139 50 – 100 >6 0.14 – 0.20 50 – 100 >10 Application Food container etc

What is the role of aluminum foil stack rolling (double rolling)?

Aluminum foil rolling produces plastic deformation under the conditions of roll-free rolling. At this time, the rolling mill frame is elastically deformed and the rolls are elastically flattened. When the thickness of the rolled piece reaches a smaller and more limited thickness h. When the rolling pressure has no effect, it is very difficult to make the rolled piece thinner. Usually two pieces of aluminum foi ...

Analysis on the Causes of Drums in High-speed Aluminum Foil Rolling

It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...

Semi-rigid container foil and surface oiling treatment

Pre-coated aluminum foil used for punching various containers, commonly used alloy 8011, 3003, 3004, 1145, etc., thickness is 0.02-0.08mm. Oiling thickness is 150-400mg/m². The use of aluminum foil as a semi-rigid container to hold food has been widely adopted at home and abroad. With the continuous development of the national economy and the continuous improvement of people’s living standards, people’s health ...

Can we put the aluminum foil in the air fryer?

As the name suggests, an air fryer is a machine that uses air to "fry" food. It by using the principle of high-speed air circulation, mainly through the heating tube to heat the air, and then the fan will air into high-speed circulation heat flow, when the food is heating, hot air convection can make food fast dehydration, the oil of baking food itself, in the end, become golden crispy food surface, appear simila ...

Features of aluminum foil rolling

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

The order of aluminum foil in production #11151746 export to Vietnam

ITEM SIZE (MM) ALLOY / TEMPER WEIGHT (KGS)  ALUMINIUM FOIL, ID: 76MM, ROLL LENGTH: 12000 - 13000 meters 1 0.007*1270 1235 O 18000.00