chocolate aluminum foil packaging

Aluminum foil sheet for chocolate packaging

Standard thickness: 12 mic Size: 8x8 cm, 9x9 cm, 10x10 cm, 12x12 cm, 15x15 cm, 20x20 cm ( customized ) Color: silver, gold, red, purple, pink, blue, gree, brown, rose red etc Surface treatment: smooth, fine grille, orange peel pattern It can be used for packing and wrapping handicraft products. Suitable for multifarious candies, such as confections, chocolate, sweets, dessert, tea leaves etc ...

household foil

Aluminum foil for household

what is House hold Aluminium Foil? Household Aluminium Foil ( HHF ) has many special characteristics: rich polish, lightweight, anti-damp, anti-pollute and is the well transmit electricity body. It has been used vastly in the shield layer of the food vessel, electron, material equipment, and communication cable. We can supply aluminum foil thickness from 0.0053-0.2mm, and width from 300-1400mm. Alloy includes 80 ...

Aluminum foil for capacitor

Aluminum foil for capacitor parameters Alloy Temper Thickness Width Core inner diameter Maximum outer diameter of aluminum coil Thickness tolerance Wettability Brightness L Aluminum foil for capacitors 1235 0 0.005-0.016mm 100-500mm 76 500 ≦5 Class A (Brush water test) ≦60 aluminum foil capacitor The aluminum foil used in electrolytic capacitors is a corrosive material that wor ...

industrial aluminum foil roll

Aluminum foil for industrial use

Parameters of industrial grade aluminum foil Alloy: 3003, 8011 etc Applications of industrial used aluminum foil Insulation, low temperature resistant, al pe laminited for packing, beverage industrial use and wine use etc

Aluminum foil for tape

What is Aluminum Foil Tape? Aluminum foil tape is a tape based on aluminum foil, which is divided into the single-sided tape and double-sided tape; it can also be divided into conductive tape and non-conductive tape; conductive tape can also be divided into the unidirectional conductive tape and anisotropic conductive tape; It is divided into ordinary aluminum foil tape and high-temperature resistant aluminum fo ...

Part of the cause of aluminum foil splitting and cutting edges, polygons, and powder falling

The post-processing of aluminum foil is an important part of an enterprise, which is related to the yield of an aluminum enterprise and the profit point of the enterprise. The higher the yield, the higher the profit point of the enterprise. Of course, the yield rate must be controlled in every link, standardized operation, and sophisticated equipment and responsible leaders and employees are required. I don't und ...

Semi-rigid container foil and surface oiling treatment

Pre-coated aluminum foil used for punching various containers, commonly used alloy 8011, 3003, 3004, 1145, etc., thickness is 0.02-0.08mm. Oiling thickness is 150-400mg/m². The use of aluminum foil as a semi-rigid container to hold food has been widely adopted at home and abroad. With the continuous development of the national economy and the continuous improvement of people’s living standards, people’s health ...

Analysis on the Causes of Drums in High-speed Aluminum Foil Rolling

It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...

Aluminum foil rolling process and characteristics

In the production of double foil, the rolling of aluminum foil is divided into three processes: rough rolling, intermediate rolling, and finishing rolling. From a technological point of view, it can be roughly divided from the thickness of the rolling exit. The general method is that the exit thickness is greater than Or equal to 0.05mm is rough rolling, the exit thickness is between 0.013 and 0.05 is intermediat ...

How to control the thickness difference of aluminum foil?

It is a characteristic of aluminum box rolling that the thickness deviation is difficult to control. The thickness difference of 3% is not difficult to control in the production of plate and strip, but it is more difficult to control in the production of aluminum foil. As the thickness of the aluminum box becomes thinner, its micro-conditions can affect it, such as temperature, oil film, and oil and gas concen ...

What is the cause of oil spots on aluminum foil?

The rolling oil and other oil stains remaining on the surface of the foil, which are formed on the foil surface to varying degrees after annealing, are called oil spots. The main reasons for oil spots: high degree of oil in aluminum foil rolling, or inappropriate distillation range of rolling oil; mechanical oil infiltration in aluminum foil rolling oil; improper annealing process; excessive oil on the surface ...