PTP aluminum blister foil

PTP aluminum Blister foil parameter Alloy 1235, 8011, 8021 etc Temper  O( HO ), H18, etc Width 300mm, 600mm, etc Thickness OP: 0.5 - 1.5 g/m2 Aluminum foil: 20 micron ( 0.02mm ), 25 micron ( 0.025mm ), 30 micron ( 0.3mm ) etc HSL ( VC ):3 - 4.5 gsm Primer: 1gsm Surface treatment Laminated, printing, Single bright side, etc what is PTP aluminum blister ...

aluminum foil label sticker

Aluminum foil for labels

RFID radio frequency identification is a non-contact automatic identification technology, which automatically recognizes the target object and obtains related data through radio frequency signals. The identification work does not require manual intervention and can work in various harsh environments. RFID technology can identify high-speed moving objects and can identify multiple tags at the same time, an ...

8021 aluminum foil

8021 alloy aluminum foil

8021 aluminum foil has excellent moisture resistance, shading, and extremely high barrier ability: elongation, puncture resistance, and strong sealing performance. The aluminum foil after compounding, printing, and gluing are widely used as a packaging material. Mainly used for food packaging, blister drug packaging, soft battery packs, etc. The Advantages Of 8021 Aluminum Foil (1) The surface is clean and ...

1200 aluminum foil

1200 alloy aluminum foil

1200 aluminum foil details Alloy 1200 aluminum foil Temper F, O,H12,H16,H18,H22,H24,H26 Thickness 0.3-15mm Width*Length (10-1600mm)*C 1200 alloy aluminum foil parameters Chemical Composition of Alloy 1200 aluminium foil Si+Fe Cu Mn Zn Ti Mg Cr Other Al ≤1.0 ≤0.05 ≤0.05 ≤0.1 ≤0.05 - - 0.05(each) 0.15(total) 99.00 Mechanical propertiesof ...

How is aluminum foil produced?

Cast-rolled aluminum foil production process Aluminum liquid, aluminum ingot -> Smelt -> Continuous roll casting -> Winding -> Cast roll finished product Plain foil production process Plain foil -> Cast-rolled coil -> Cold rolled -> Foil rolling -> Slitting -> Annealing -> Plain foil finished product The manufacture of aluminum foil is similar to making pasta at home. A large b ...

Development of domestic double zero foil project

Only China, the United States, Japan and Germany can produce double zero foils with a thickness of 0.0046mm in the world. From a technical point of view, it is not difficult to produce such thin foils, but it is not easy to efficiently produce high-quality double-zero foils on a large scale. At present, many enterprises in my country can realize the commercial production of double zero foil, mainly including: ...

How to distinguish aluminum foil and aluminum film

A watch, two, feel, three, folding, four, twist, 5, knife scraping, 6, fire method, to help you identify the plastic composite packaging is made of aluminum foil or aluminum film material. Two, watch: the brightness of the packaging aluminum layer is not as bright as the aluminum plated film, that is, the packaging made of aluminum foil is not as bright as the packaging made of the aluminum plated film. Alumin ...

Analysis on the Causes of Drums in High-speed Aluminum Foil Rolling

It is generally believed that the single-sheet rolling speed of the aluminum foil should reach 80% of the rolling design speed of the rolling mill. Danyang Aluminum Company introduced a 1500 mm four-high irreversible aluminum foil roughing mill from Germany ACIIENACH. The design speed is 2 000 m/min. At present, the single-sheet aluminum foil rolling speed is basically at the level of 600m/miT, and the domestic s ...

Part of the cause of aluminum foil splitting and cutting edges, polygons, and powder falling

The post-processing of aluminum foil is an important part of an enterprise, which is related to the yield of an aluminum enterprise and the profit point of the enterprise. The higher the yield, the higher the profit point of the enterprise. Of course, the yield rate must be controlled in every link, standardized operation, and sophisticated equipment and responsible leaders and employees are required. I don't und ...

When grilling food with aluminum foil, should the shiny side face up or the matte side up?

Since aluminum foil has shiny and matte sides, most of the resources found on search engines say this: When cooking food wrapped or covered with aluminum foil, the shiny side should face down, facing the food, and the dumb side Glossy side up. This is because the glossy surface is more reflective, so it reflects more radiant heat than matte, making the food easier to cook. Is it really? Let's analyze the heat ...